Bauknecht Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Bauknecht home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
41 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| AL01 | Freezer Temperature Sensor Fault Info: The temperature sensor (NTC) inside the freezer compartment is faulty or disconnected. | Refrigerator | |
| AL02 | Refrigerator Temperature Sensor Fault Info: The temperature sensor (NTC) inside the fridge compartment is faulty or disconnected. | Refrigerator | |
| AL03 | Freezer High Temperature Alarm Info: The temperature inside the freezer is too high. This could be due to the door being left open, a faulty door seal, or a cooling system failure. | Refrigerator | |
| C | Freezer/Fridge Compartment Sensor Fault Info: Indicates a fault with one of the temperature sensors, often displayed as a flashing 'C'. | Refrigerator | |
| CF | Communication Failure Info: Communication has been lost between the main control board and the display panel. | Refrigerator | |
| E1 | Aquastop Activated Info: Water leak detected in the base tray of the dishwasher. | Dishwasher | |
| E4 | Heating Error Info: Fault with the heating element or the NTC temperature sensor. | Dishwasher | |
| FDL | Door Lock Failure Info: The door is not locking correctly when a cycle is started. 2 Elite Techs Verified | Washing Machine | |
| FDU | Door Unlock Failure Info: The door lock mechanism has failed to release at the end of the cycle. | Washing Machine | |
| FOD | Foam Detected Info: Excessive suds have been detected by the pressure sensor, usually due to using too much or the wrong type of detergent. | Washing Machine | |
| F01 | Temperature Sensor Fault Info: The oven's NTC temperature probe is defective (open or shorted circuit). | Oven | |
| F02 | Water Leak Detected / Aquastop Activated Info: A leak has been detected in the base of the appliance, activating the flood protection switch. | Dishwasher | |
| F03 | Control Board Memory Error Info: EEPROM data corruption or failure on the main control board. | Oven | |
| F4 | Drain Fault Info: Water is not being pumped out correctly. The drain pump or hose is blocked. 5 Elite Techs Verified | Dishwasher | |
| F05 | Door Lock Mechanism Fault Info: The door lock motor or switch has failed, or the lock is physically jammed. | Oven | |
| F06 | Motor Tacho Error / No Drum Rotation Info: The motor's speed sensor (tacho) is not sending signals to the control board, or the motor itself has an issue. | Washing Machine | |
| F07 | Heater Relay Fault Info: The heater control relay on the main circuit board is stuck or has failed, preventing the heater from being activated. | Washing Machine | |
| F7 | Flowmeter Fault Info: The flowmeter, which measures the amount of water entering the machine, is sending incorrect signals or has failed. | Dishwasher | |
| F08 | Heating Element Fault Info: The heating element has an open circuit or has failed. | Washing Machine | |
| F09 | Overfill or Excessive Foam Info: The pressure switch is stuck in the 'full' position, either due to a faulty switch, a blocked pressure hose, or excessive detergent causing foam. | Washing Machine | |
| F10 | Sensor detects dirty water or is faulty Info: The Optical Water Indicator (OWI) sensor is detecting dirty water, or the sensor itself is soiled or defective. | Dishwasher | |
| F11 | Communication Error Info: A communication breakdown has occurred between the main control unit and another component, like the motor or user interface. | Washing Machine | |
| F12 | Heater Fault / No Heat Info: A failure in the heating element or its wiring, potentially a short circuit. | Washing Machine | |
| F13 | Door Lock Fault Info: The machine cannot lock the door, or the control board is not receiving the 'locked' signal from the door switch. | Washing Machine | |
| F14 | Control Board Memory Error Info: The EEPROM (memory chip) on the main control board has failed or become corrupted. | Washing Machine | |
| F15 | Motor Control Unit (MCU) Fault Info: An error has occurred on the electronic board that controls the drum motor, or the motor itself is faulty. | Washing Machine | |
| F16 | Optical Water Indicator (OWI) Sensor Fault Info: The sensor that measures the turbidity (clearness) of the water is faulty. | Dishwasher | |
| F21 | User Interface Communication Error Info: The main control board cannot communicate with the front control panel or display. | Washing Machine | |
| F22 | Motor Drive Fault Info: No communication between the main control board and the motor. | Washing Machine | |
| F23 | Pressure Switch Fault Info: An issue between the pressure switch and the heating element control. The pressure switch may be faulty. | Washing Machine |