Bompani Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Bompani home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
16 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| E01 | Door will not lock or machine will not start. Info: Faulty door lock mechanism, wiring issue, or a problem with the main control board. | Washing Machine | |
| E1 | Dishwasher will not start and may be beeping; anti-flood system activated. Info: A leak has been detected in the base of the machine, which has activated the float switch (Aquastop system). | Dishwasher | |
| E02 | Washing machine is not filling with water or filling very slowly. Info: Low water pressure, kinked inlet hose, blocked filter in the hose or water inlet valve, or a faulty water inlet valve (solenoid). | Washing Machine | |
| E03 | Water is not draining from the drum at the end of a cycle. Info: The drain filter or drain pump is blocked with debris, the drain hose is kinked or blocked, or the drain pump has failed. | Washing Machine | |
| E3 | Water is not heating up, resulting in poor wash performance and wet dishes. Info: The heating element has failed, the NTC temperature sensor is faulty, or there's a problem with the wiring or control board relay for the heater. | Dishwasher | |
| E04 | Machine overfills with water or stops with water inside. Info: The pressure switch, which detects the water level, is faulty, or the tube connected to it is blocked or has come loose. Can also be triggered by excessive foaming from too much detergent. | Washing Machine | |
| E4 | Dishwasher is overfilling with water. Info: The pressure switch is not correctly sensing the water level, or the water inlet valve is stuck open. | Dishwasher | |
| E05 | The machine is not heating the water. Info: The NTC (temperature sensor) is faulty, providing incorrect readings to the control board, or the wiring to the sensor is broken. | Washing Machine | |
| E5 | Dirty water remains in the bottom of the dishwasher after a cycle. Info: The filters are clogged, the drain hose is blocked or kinked, or the drain pump is faulty or obstructed. 5 Elite Techs Verified | Dishwasher | |
| E07 | The drum does not spin or spins erratically/violently. Info: A fault with the motor's speed sensor (tacho), worn out motor carbon brushes, or a loose connection to the motor. | Washing Machine | |
| F1 | Freezer is not cooling properly or is icing up. Info: The freezer temperature sensor (thermistor) has failed, sending incorrect information to the control board. | Refrigerator | |
| F2 | The fresh food (refrigerator) section is too warm or too cold. Info: The refrigerator temperature sensor (thermistor) has failed. | Refrigerator | |
| F3 | Excessive frost or ice buildup on the back wall of the freezer or on the evaporator coils. Info: The defrost sensor (bimetal thermostat or thermistor) has failed, preventing the defrost cycle from running correctly. | Refrigerator | |
| F4 | Refrigerator is not cooling well and the evaporator coils in the freezer are completely covered in ice. Info: The defrost heater has burned out and is no longer melting the frost during the defrost cycle. 5 Elite Techs Verified | Refrigerator | |
| F8 | Oven is unresponsive or displays a general failure code. Info: A generic electronic fault has been detected by the main control board (PCB). | Oven | |
| SY EF | Freezer is warm but the compressor is running. You may not hear air circulating. Info: The evaporator fan motor has failed or is blocked by ice. | Refrigerator |