CodesErreur Logo
CodesErreur.comPowered by CodesErreur
Database
Tools
Diagnostic ToolsNew Parts Locator
Community
CertificationsPRO Top Techs
B2B Services
Brands Manuals Specialists Job Board Elite Forum Academy
Premium
CodesErreur Logo

CodesErreur.com

Premium appliance diagnostics & repair database.
Powered by AI to help certified technicians worldwide.

Trusted by professionals in CH & FR

Platform

Error Code SearchAI Diagnostic ChatBrand Pokedex

Professionals

Elite Tech ForumElite Job BoardPremium Memberships

Corporate

Terms of UsePrivacy Policy

SAFETY DISCLAIMER

The technical information, diagnostic guides, error codes, and AI-generated suggestions provided on this website are intended exclusively for certified and qualified professionals. Appliance repair involves severe electrical hazards, high voltages, and mechanical risks that can result in fatal injury or severe property damage. If you are not a trained technician, do not attempt to repair any appliances. CodesErreur assumes no responsibility or liability for any damage, injury, or consequential losses resulting from the use of the information provided on this platform. You use all information entirely at your own risk.

© 2026 CodesErreur. All rights reserved.

Terms of Service Privacy Policy
Back to Search

Ocean Error Codes & Diagnostics

Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Ocean home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.

17 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
CodeFault / DiagnosticsAppliancesAction
AL01
Machine has stopped and error is displayed, possible water on floor.
Info: The anti-flood or Aquastop system has been activated due to a leak detected in the base of the appliance.
Washing Machine
AL01 Full Steps Diagnose
d01
Machine won't fill with water.
Info: Water tap is closed, inlet hose is kinked or blocked, or the water inlet valve has failed.
Washing Machine
d01 Full Steps Diagnose
d02
Water not draining from the drum.
Info: The drain filter is clogged, the drain hose is blocked or kinked, or the drain pump is faulty.
Washing Machine
d02 Full Steps Diagnose
d03
Water is not heating up.
Info: The heating element has failed, or there is a fault with the NTC temperature sensor or its wiring.
Washing Machine
d03 Full Steps Diagnose
d04
Machine stops mid-cycle, motor not turning.
Info: A short circuit has been detected in the motor power triac on the main control board.
Washing Machine
d04 Full Steps Diagnose
d06
Drum does not spin or spins erratically.
Info: The motor's tacho coil is faulty or has become disconnected, preventing the board from reading the motor speed.
Washing Machine
d06 Full Steps Diagnose
d07
The door will not lock, or the cycle will not start.
Info: The door is not closed properly, or the door lock mechanism has failed.
Washing Machine
d07 Full Steps Diagnose
d10
Machine has overfilled with water.
Info: The water level pressure switch is faulty, or the inlet valve is stuck open.
Washing Machine
d10 Full Steps Diagnose
d21
Machine is unresponsive or displays error randomly.
Info: Communication error between the main control board (PCB) and the display board.
Washing Machine
d21 Full Steps Diagnose
F1
Oven is not heating correctly or overheating.
Info: The oven temperature sensor (probe) circuit is open. The sensor may be faulty or disconnected.
Oven
F1 Full Steps Diagnose
F2
Dishwasher does not drain the water.
Info: Drain filter is clogged, drain hose is blocked, or the drain pump has failed.
Dishwasher
F2 Full Steps Diagnose
F3
Oven displays an error and is unresponsive.
Info: EEPROM data corruption on the main control board. A power surge can sometimes cause this.
Oven
F3 Full Steps Diagnose
F4
Dishwasher has stopped and may be continuously draining.
Info: The anti-flood float switch in the base has been activated due to a leak.
5 Elite Techs Verified
Dishwasher
F4 Full Steps Diagnose
F5
Door cannot be opened after a pyrolytic cleaning cycle.
Info: The door lock mechanism has failed or is jammed, or the oven has not cooled down sufficiently.
Oven
F5 Full Steps Diagnose
F6
The water distribution system is not working correctly.
Info: Fault with the alternating wash motor (water director) that switches water flow between the upper and lower spray arms.
Dishwasher
F6 Full Steps Diagnose
F8
Oven overheats and shuts down.
Info: The cooling fan, which cools the electronics, has failed or is obstructed.
Oven
F8 Full Steps Diagnose
F9
Dishwasher is unresponsive or behaving erratically.
Info: A fault has been detected on the main control board (PCB), often a configuration or memory error.
Dishwasher
F9 Full Steps Diagnose