Asko Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Asko home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
36 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| Door lock fault | Door cannot be locked Info: The door is not properly closed or the locking mechanism has failed. | Washing Machine | |
| Drain pump blocked | Machine will not drain Info: A foreign object is physically blocking the drain pump impeller. | Washing Machine | |
| E0 | Refrigerator sensor fault Info: The temperature sensor for the fresh food (refrigerator) compartment is faulty. | Refrigerator | |
| E01 | Door Lock Fault Info: The machine cannot lock or detect that the door is locked. This could be a faulty lock mechanism, a bad connection, or a control board issue. | Washing Machine | |
| E1 | Freezer Sensor Fault Info: The temperature sensor (thermistor) in the freezer compartment is faulty. | Refrigerator | |
| E02 | Water Filling Fault Info: The machine has not filled to the required level in the allotted time. | Washing Machine | |
| E2 | Refrigerator Sensor Fault Info: The temperature sensor (thermistor) in the fresh food compartment is faulty. | Refrigerator | |
| E03 | Draining Fault Info: The water has not been drained from the drum within the specified time. | Washing Machine | |
| E3 | Defrost Sensor Fault Info: The sensor attached to the evaporator coil, which monitors defrost cycles, has failed. | Refrigerator | |
| E04 | Overfilling Fault Info: Too much water has entered the machine, or the pressure sensor is faulty. | Washing Machine | |
| E4 | Defrost Heater Fault Info: The defrost heater element or thermal fuse has failed, preventing the appliance from properly defrosting the evaporator coil. | Refrigerator | |
| E05 | Temperature Sensor (NTC) Fault Info: The control board has detected an open or short circuit in the NTC temperature sensor. | Washing Machine | |
| E5 | Cooktop Overheating Info: The temperature sensors underneath the ceramic glass have detected excessive heat, shutting the element down for safety. 5 Elite Techs Verified | Hob | |
| E06 | Motor Fault Info: An issue with the main drive motor has been detected. This could be a problem with the motor's tacho, carbon brushes (if applicable), or the motor control board. | Washing Machine | |
| E6 | Communication Error Info: Faulty communication between the hob's user interface control and the power module for a specific cooking zone. | Hob | |
| E8 | Ice Maker Sensor Fault Info: The sensor within the ice maker assembly is defective. | Refrigerator | |
| F1 | Heating System Fault Info: The dryer's heating element is not working, or the thermostats have tripped. | Dryer | |
| F2 | Temperature Sensor (NTC) Error Info: The temperature sensor is providing an out-of-range reading, indicating it is faulty. | Dryer | |
| F3 | Moisture Sensor Fault Info: The moisture sensing strips inside the drum are not detecting clothes correctly, possibly due to residue buildup or a wiring issue. | Dryer | |
| F4 | Drain Pump Fault (Condenser Models) Info: For condenser or heat pump dryers, the water pump that removes condensed water to the reservoir or drain is blocked or has failed. 5 Elite Techs Verified | Dryer | |
| F5 | Spray Arm Fault Info: The control board is not detecting the rotation of the spray arms. This can be caused by a blockage preventing rotation or a faulty sensor. | Dishwasher | |
| F6 | Door Lock Motor Fault Info: The motorized door lock is unable to engage or disengage correctly. It may be jammed or the motor has failed. | Oven | |
| F7 | Turbidity Sensor Fault Info: The water turbidity (soil level) sensor is faulty or has become excessively soiled, providing incorrect data to the control board. | Dishwasher | |
| F8 | Cooling Fan Fault Info: The cooling fan, which cools the oven's electronics, is not running or is not detected by the control board. | Oven | |
| F9 | Configuration error or Power Module Fault Info: A critical error in the induction hob's main power board or a misconfiguration after a repair. | Hob | |
| F10 | Control Panel or Keypad Error Info: A button is stuck, or there is a fault in the user interface control board. | Oven | |
| F11 | Drainage Problem Info: The dishwasher failed to drain water within the programmed time. | Dishwasher | |
| F12 | Water Inlet Error Info: The machine has detected an issue with the water supply, often related to low water pressure. | Dishwasher | |
| F52 | Pressure Sensor Circuit Fault Info: The pressure sensor that monitors the water level has detected an issue with the circulation pump pressure, indicating a blockage or pump failure. | Dishwasher | |
| F54 | Overfilling / High Water Level Info: The software has detected an overfill situation, likely due to excessive suds from incorrect detergent or a faulty pressure sensor. | Dishwasher |