| F4 | Drainage system error Info: The dishwasher failed to drain within the allotted time. The filter, drain hose, or drain pump is blocked. | Dishwasher | |
| F5 | Spray arm rotor blocked Info: The main spray arm is not rotating correctly, detected by the circulation pump's sensor. | Dishwasher | |
| F6 | Water inlet error Info: The dishwasher is not filling with water. The water tap may be off, the inlet hose kinked, or the water inlet valve has failed. | Dishwasher | |
| F08 | Heater relay fault Info: The heater relay on the main control board is stuck or has failed. | Washing Machine | |
| F8 | Water level fault Info: The water level sensor (pressure switch) has detected an incorrect water level, either too high or too low. | Dishwasher | |
| F09 | Control board software error Info: An error has occurred in the software or memory (EEPROM) of the main control board. | Washing Machine | |
| F9 | Incorrect line voltage detected Info: The voltage of the power supply is outside the acceptable range (too high or too low). | Induction Hob | |
| F12 | Communication error between boards Info: The main control board cannot communicate with the display board. | Washing Machine | |
| F15 | Drum motor or sensor fault Info: Error related to the drum positioning sensor or motor control unit, often seen in top-loading models. | Washing Machine | |
| F2 E1 | Door lock failure Info: The motorized door lock has failed to lock or unlock correctly, often during a self-clean cycle. | Oven | |
| F3 E0 | Oven temperature sensor open Info: The control board has detected an open circuit for the oven's temperature sensor (thermistor). | Oven | |
| F3 E1 | Oven temperature sensor shorted Info: The control board has detected a short circuit for the oven's temperature sensor (thermistor). | Oven | |
