Sharp Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Sharp home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
33 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| E01 | Ice maker sensor error Info: The temperature sensor for the ice maker is malfunctioning, disconnected, or has failed. | Refrigerator | |
| E02 | Water fill timeout Info: The machine is not filling with water quickly enough. This could be due to a closed water tap, kinked inlet hose, or a faulty water inlet valve. | Washing Machine | |
| E03 | Drainage fault Info: Water is not draining from the drum. The drain pump filter is blocked, the drain hose is kinked or blocked, or the drain pump has failed. | Washing Machine | |
| ER3 | Stuck keypad button Info: The control board detects that a button on the user interface has been pressed for an extended period (e.g., 60 seconds). | Oven | |
| E04 | Freezer compartment sensor error Info: The main temperature sensor in the freezer section has an open or short circuit. | Refrigerator | |
| E05 | Freezer defrost sensor error Info: The defrost sensor, which monitors the evaporator coil temperature, has failed. | Refrigerator | |
| E06 | Refrigerator compartment sensor error Info: The temperature sensor in the fresh food (refrigerator) section is faulty. | Refrigerator | |
| E07 | Motor tachometer sensor error Info: The control board is not receiving a signal from the motor's speed sensor (tacho). The tacho may be loose or faulty. | Washing Machine | |
| E09 | Unbalanced load detected Info: The laundry inside the drum is not distributed evenly, preventing the machine from spinning safely. | Washing Machine | |
| E10 | Refrigerator fan motor error Info: The fan motor in the refrigerator compartment is not running, is blocked, or has failed. | Refrigerator | |
| E011 | Oven over-temperature Info: The oven temperature has exceeded a safe limit, often due to a stuck relay on the control board or a faulty temperature sensor. | Oven | |
| E11 | Freezer fan motor error Info: The evaporator fan motor in the freezer is blocked or has failed. | Refrigerator | |
| E12 | Water leak detected Info: The AquaStop system has detected water in the base of the machine, indicating a leak. | Washing Machine | |
| ER14 | Cooling fan speed error Info: The cooling fan is running too slow or not at all. The fan may be blocked or have failed. 5 Elite Techs Verified | Oven | |
| E15 | Communication error Info: Communication is lost between the main control board and the display/user interface board. | Refrigerator | |
| E17 | Foam detection error Info: Excessive foam has been detected in the drum, usually due to using too much or the wrong type of detergent. | Washing Machine | |
| E20 | Main PCB failure Info: An internal fault has been detected on the main power control board (PCB). | Refrigerator | |
| E31 | Drying system temperature sensor fault Info: The NTC sensor for the dryer function is faulty or has an open circuit. | Washing Machine | |
| FE | Control board fault Info: An internal error has occurred on the main electronic control board. | Dishwasher | |
| F1 | Oven temperature sensor (RTD) open circuit Info: The main oven temperature sensor is disconnected or has failed, resulting in an open circuit reading. | Oven | |
| F2 | Drainage error Info: The dishwasher cannot drain the water. The filter is blocked, the drain hose is kinked, or the drain pump is faulty. | Dishwasher | |
| F3 | Oven temperature sensor (RTD) short circuit Info: The oven temperature sensor has shorted out, or its wiring is pinched. | Oven | |
| F4 | Door lock mechanism failure Info: The motorized door lock for the self-clean cycle is jammed or has failed. 5 Elite Techs Verified | Oven | |
| F5 | Insufficient water supply Info: The dishwasher is not filling with enough water in the specified time. Water tap may be off, inlet hose kinked, or inlet valve filter blocked. | Dishwasher | |
| F6 | Heating element failure Info: The water is not heating. The heating element is faulty, or there's an issue with the wiring or control board relay. | Dishwasher | |
| F7 | Temperature sensor (NTC) error Info: The control board has detected an open or short circuit from the temperature sensor. The sensor is faulty. | Dishwasher | |
| F8 | Main board communication error Info: The main control board (power board) has lost communication with the display board. | Oven | |
| F9 | Control board component failure Info: A critical component on the electronic oven control (EOC) has failed. | Oven | |
| F1E2 | Door lock circuit error Info: The control board has detected a problem in the door lock motor circuit. | Oven | |
| H01 | Refrigerator compartment sensor fault Info: An open circuit has been detected in the fresh food compartment's temperature sensor. | Refrigerator |