| E01 | Door will not lock or machine thinks the door is open. Info: Fault with the door lock mechanism, wiring to the lock, or the main control board. | Washing Machine | |
| E1 | Dishwasher fails to fill with water within the expected time. Info: Water supply issue, kinked inlet hose, or faulty water inlet valve/solenoid. | Dishwasher | |
| E02 | Machine is not filling with water or filling very slowly. Info: Water supply is turned off, inlet hose is kinked or blocked, inlet valve filter is blocked, or the water inlet valve has failed. | Washing Machine | |
| E2 | Dishwasher is not draining the water. Info: Clogged filters, blocked drain hose, or a faulty drain pump. | Dishwasher | |
| E03 | Machine fails to drain the water. Info: Drain filter is clogged, drain pump is blocked or faulty, or the drain hose is kinked or blocked. | Washing Machine | |
| E3 | Water is not heating up, resulting in poor wash performance. Info: Faulty heating element, wiring issue, or a fault on the main control board. | Dishwasher | |
| E04 | Machine has overfilled with water or leak detected in base. Info: Pressure switch fault, water inlet valve stuck open, or an internal leak has activated the anti-flood switch in the base. | Washing Machine | |
| E4 | Dishwasher has stopped mid-cycle and may show signs of leaking. Info: The machine has overfilled, or the anti-flood switch in the base has been activated by a leak. | Dishwasher | |
| E05 | Water is not heating up or cycle gets stuck. Info: The NTC temperature sensor is faulty (open or short circuit). | Washing Machine | |
| E07 | Motor not turning or spinning erratically. Info: Fault with the motor tacho (speed sensor), motor brushes are worn, or there is a motor wiring issue. | Washing Machine | |
| E09 | Motor is not running at all or runs at full speed uncontrollably. Info: A short circuit in the motor's power triac on the main control board (PCB). | Washing Machine | |
| E16 | Machine trips the circuit breaker, or water does not heat. Info: The heating element has failed or has a short circuit to earth. | Washing Machine | |
| F1 | Oven not heating correctly, displays error. Info: Oven temperature sensor (NTC/thermistor) has failed or its connection is loose (open circuit). | Oven | |
| F2 | Oven overheating or not heating correctly. Info: The oven temperature sensor (NTC/thermistor) has a short circuit. | Oven | |
| F3 | Oven has shut down and displays an error. Info: Overheating detected by the safety thermostat or the main control board. | Oven | |
| F4 | Oven overheats, electronics may shut down after use. Info: The cooling fan that cools the electronic components is not working. | Oven | |
| F8 | Oven door will not lock or unlock, especially for pyrolysis (self-cleaning) modes. Info: The door locking mechanism is jammed or has failed electronically. | Oven | |
| STOP | The word 'STOP' is flashing on the oven display and it will not operate. Info: This can indicate a major electronic fault, a problem with the door lock, or that the oven is in 'demo' or 'showroom' mode. | Oven | |
