| F4 | Freezer evaporator sensor fault Info: The defrost sensor (NTC) on the freezer's evaporator coil has failed. This will affect the automatic defrost cycle. | Refrigerator | |
| F05 | Door lock mechanism failure Info: On pyrolytic (self-cleaning) models, the door locking mechanism has failed to engage or disengage correctly. | Oven | |
| F5 | Defrost heater fault Info: The control board has detected a failure in the defrost heater circuit. This will cause ice to build up on the evaporator coils. | Refrigerator | |
| F6 | Main board communication failure Info: A communication error has occurred between the main power board and the display/user interface board. | Refrigerator | |
| F07 | Power board failure Info: A fault has been detected on the main power board, often related to a power supply component or relay. | Oven | |
| F7 | Compressor failure or overheat Info: The main board has detected an issue with the compressor circuit, or the compressor's thermal overload protector has tripped. | Refrigerator | |
| F08 | Cooling fan failure Info: The tangential cooling fan, which cools the oven's external surfaces and electronics, is not operating. | Oven | |
| F8 | Freezer fan motor failure Info: The fan that circulates cold air within the freezer (and often to the fridge) is not working. | Refrigerator | |
| F9 | Diverter valve fault Info: The diverter valve, which directs water to the upper or lower spray arms, is stuck or faulty. | Dishwasher | |
| F13 | Main control board (ECU) fault Info: A critical error has been detected on the main electronic control unit. This can be caused by a power surge or component failure. | Washing Machine | |
| F14 | Control board memory (EEPROM) error Info: There is a data corruption or communication error within the main board's memory chip. | Washing Machine | |
| H | Heating phase indicator Info: This is not an error, but an indicator that the appliance is in the heating phase of a cycle. | Dishwasher | |
| STOP | Oven overheating / Safety thermostat tripped Info: The oven cavity has reached an excessive temperature, tripping the safety cut-out thermostat. Often caused by a cooling fan failure or stuck element relay. | Oven | |