Atlantic Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Atlantic home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
52 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| E35 | Parasitic flame detected Info: The boiler detects a flame even when the gas valve should be closed. Faulty gas valve or flame sensor. | Boiler | |
| E40 | Door lock fault Info: The door is not closed properly, or the door lock mechanism has failed. | Washing Machine | |
| E61 | Water is not heating Info: Heating element failure or a fault with the temperature sensor (NTC). | Washing Machine | |
| E90 | Appliance unresponsive, communication error Info: Communication fault between the main control board and other electronic components. | Washing Machine | |
| F01 | Oven is completely dead or unresponsive Info: Failure of the main electronic control board (PCB). | Oven | |
| F1 | Overheat lockout Info: Lack of water circulation causing the boiler to overheat. Could be a seized pump or closed valves. | Boiler | |
| F2 | No hot water Info: Domestic Hot Water (DHW) temperature sensor (NTC) is faulty. | Boiler | |
| F03 | Oven overheating or not heating correctly Info: The oven temperature sensor (NTC) has an open circuit, meaning it's broken or disconnected. | Oven | |
| F3 | No central heating Info: Central Heating (CH) temperature sensor (NTC) is faulty. | Boiler | |
| F4 | Boiler fails to ignite Info: Multiple ignition attempts have failed. Can be due to gas supply, electrode, or flame sensor issues. 5 Elite Techs Verified | Boiler | |
| F05 | Door lock mechanism error Info: Fault with the door locking system, common during or after a pyrolytic cleaning cycle. | Oven | |
| F5 | Air pressure switch or fan fault Info: The air pressure switch has not operated correctly, indicating a fan or flue issue. | Boiler | |
| F6 | Poor cleaning performance, usually on one rack Info: Fault with the diverter valve, which alternates water flow between the upper and lower spray arms. The valve may be stuck or its motor has failed. | Dishwasher | |
| F08 | No heat from heating element Info: The heating element relay on the main board has failed. | Oven | |
| F8 | Oven door will not lock for self-clean cycle, or will not unlock after Info: There is a fault with the motorized door lock assembly. The mechanism could be jammed, or the motor/switch has failed. | Oven | |
| F11 | Wash motor or circulation pump error Info: The main circulation pump is blocked by debris or has failed. | Dishwasher | |
| F12 | No water entering the appliance Info: Water inlet valve is closed, hose is kinked, or the inlet valve solenoid has failed. | Dishwasher | |
| F22 | Low water pressure warning Info: The heating system pressure is below the minimum required level (typically 0.5 bar). | Boiler | |
| F37 | Incorrect system water pressure Info: Pressure is either too low or too high, or the pressure sensor is faulty. | Boiler | |
| H | High temperature alarm, flashing display or beeping Info: The internal temperature of the refrigerator or freezer is too high. This can be caused by a door left open, a power outage, or a cooling system fault. | Refrigerator | |
| i20 | Water left in the bottom of dishwasher after cycle Info: Drain filter or drain hose is blocked. | Dishwasher | |
| i30 | Dishwasher has stopped and may be beeping continuously Info: Anti-flood device has been activated due to a leak in the base of the machine. | Dishwasher |