| F24 | Overfill Condition Detected Info: The pressure switch has detected that the water level is too high and has engaged the drain pump as a safety measure. | Washing Machine | |
| F26 | Drain Pump Control Fault Info: The main board cannot activate the drain pump, possibly due to a faulty triac on the board or a wiring issue. | Washing Machine | |
| F27 | Motor Reversal Error Info: The drum is only turning in one direction. The motor reversing relay on the control board is faulty. | Washing Machine | |
| F35 | Water Level Sensor Error (Analog) Info: The analog pressure switch has detected an overfill condition, common in models with auto water level detection. | Washing Machine | |
| F42 | Keypad Error / Key Stuck Info: A button on the touch control has been pressed for too long, or there is moisture/debris on the surface. | Induction Hob | |
| F43 | Unsuitable Cookware Info: The pan is not induction-compatible, not centered correctly, or has been removed from the cooking zone. | Induction Hob | |
| F47 | Internal Communication Error Info: Communication failure between the user interface board and the power module(s). | Induction Hob | |
| F6 E4 | Water Inlet Error Info: The dishwasher is taking on water when it should not be, or the flowmeter is faulty. | Dishwasher | |
| F8 E1 | Drain Fault / Water Not Emptying Info: The drain pump is blocked, the drain hose is kinked or blocked, or the water level sensor is faulty. | Dishwasher | |
| H | High Water Temperature Info: This usually indicates a fault with the NTC temperature sensor, causing the water to overheat. | Dishwasher | |
| STOP | Function stopped during pyrolytic cleaning Info: The self-cleaning cycle was interrupted due to a fault, such as overheating or a component failure. | Oven | |
