Elica Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Elica home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
21 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| A Flashing | Light 'A' is flashing on the cooker hood display. Info: The grease filter saturation alarm has been triggered. This is a timed reminder. | Cooker Hood | |
| C Flashing | Light 'C' is flashing on the cooker hood display after filter maintenance. Info: The filter saturation alarm system needs to be reset after cleaning or replacing the filters. | Cooker Hood | |
| E1 | Extractor hood is not working, E1 is displayed. Info: Communication error between the main control board and the motor. | Cooker Hood | |
| E2 | Hob shows error E2. Info: Temperature sensor is faulty or disconnected. | Induction Hob | |
| E3 | Hob is not working and displays E3. Info: The mains voltage is too high (overvoltage protection). | Induction Hob | |
| E4 | Hob is not working and displays E4. Info: The mains voltage is too low (undervoltage protection). | Induction Hob | |
| Er4 | Error code ER4 is displayed on the hob. Info: The Bridge Zone function has been activated, but the pots are not placed correctly to span the two linked zones. | Induction Hob | |
| E6 | One or more cooking zones are not working, E6 displayed. Info: Communication error between the touch control board and the power module. | Induction Hob | |
| E9 | Hob is completely inoperable and displays E9. Info: General internal hardware fault or configuration error. | Induction Hob | |
| F Flashing | Light 'F' is flashing on the cooker hood display. Info: The charcoal/odor filter saturation alarm has been triggered. This is a timed reminder for non-ducted hoods. | Cooker Hood | |
| F0 | Cooking zone does not turn on and F0 is displayed. Info: No pan is detected, the pan is not suitable for induction, or the pan is not correctly positioned on the cooking zone. | Induction Hob | |
| F01 | Oven is not heating correctly and displays F01. Info: The oven temperature sensor (NTC) is defective or has an open circuit. | Oven | |
| F1 | A continuous beep is heard and F1 is displayed. Info: The cooking zone has been active for an extremely long time without change, or the pan is empty and has overheated. | Induction Hob | |
| F2 | Hob switches off and displays F2. Info: The hob electronics have overheated. This can be caused by prolonged use at high power or poor ventilation below the hob. | Induction Hob | |
| F03 | Oven displays F03 and may not start a cycle. Info: Error with the door lock mechanism. The door is not locking or unlocking correctly, or the door switch is faulty. | Oven | |
| F4 | Hob does not work correctly and shows F4. Info: Incorrect mains voltage detected or a power surge has occurred. 5 Elite Techs Verified | Induction Hob | |
| F5 | Controls are unresponsive and F5 is displayed. Info: The touch control panel is covered by an object (e.g., cloth, utensil) or a liquid spillage. | Induction Hob | |
| F6 | One side of the hob (left or right) stops working and displays F6. Info: Overheating of the power module for one side of the hob. | Induction Hob | |
| F7 | Hob displays F7 and may beep. Info: A fault with the temperature sensor (NTC) for a cooking zone has been detected. | Induction Hob | |
| F8 | Cooking zone stops heating and shows F8. Info: Cookware bottom is deformed or does not have a perfectly flat base, causing poor contact and overheating. | Induction Hob | |
| F9 | Hob shows error F9. Info: Internal voltage error on the electronic board. | Induction Hob |