Haier Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Haier home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
26 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| E0 | Freezer sensor fault Info: The temperature sensor in the freezer compartment has failed (open or short circuit). | Refrigerator | |
| Ed | Defrost sensor fault Info: The defrost sensor, located on the evaporator coil, has failed. | Refrigerator | |
| Er | Icemaker failure Info: A fault has been detected with the automatic icemaker module. | Refrigerator | |
| E1 | Refrigerator sensor fault Info: The temperature sensor in the fresh food (refrigerator) compartment has failed. | Refrigerator | |
| E2 | Drain pump error (Condenser models) Info: The pump that removes condensed water from the reservoir is blocked, or the water level sensor is faulty. | Tumble Dryer | |
| E3 | Water not heating Info: The water is not reaching the target temperature. This is likely due to a faulty heating element or a defective temperature sensor (NTC). | Dishwasher | |
| E4 | Communication error between main board and display Info: The wiring between the main control board and the user interface/display board is loose, damaged, or one of the boards has failed. | Refrigerator | |
| E5 | Heating system fault Info: The heating element has failed, or a thermal overload cut-out (TOC) has tripped and needs resetting or has failed. 5 Elite Techs Verified | Tumble Dryer | |
| E6 | Communication error between boards Info: A fault in the connection between the main PCB and the display board. | Tumble Dryer | |
| E7 | Temperature sensor fault (short circuit) Info: The NTC temperature sensor has failed by short-circuiting. | Dishwasher | |
| E8 | Cooking zone overheat Info: A cooking zone has overheated. This can be due to empty or unsuitable cookware being left on the zone, or a faulty temperature sensor. | Hob | |
| E12 | Water overflow Info: Too much water has entered the machine. This is usually caused by a faulty water inlet valve that is stuck open or a malfunctioning pressure switch. | Washing Machine | |
| ER21 | Touch control panel error Info: A communication issue with the touch control board, possibly due to moisture or a component failure. | Oven | |
| FF | Frozen food sensor error. Check thermistor resistance in the freezer. | Refrigerator | |
| F1 | Oven temperature sensor (NTC) error Info: The oven's temperature probe is defective (open or shorted) or has a loose connection. | Oven | |
| FC1 | Communication error Info: Communication failure between the main control board (PCB) and the display board. | Washing Machine | |
| F2 | Motor fault Info: The drum motor is not running. The drive belt could be broken, the motor start capacitor failed, or the motor itself is faulty. | Tumble Dryer | |
| F3 | Control board communication error Info: Failure in communication between the main power board and the user interface. | Oven | |
| F4 | Oven overheat detected Info: The oven has detected a temperature above the maximum safety limit. This can be caused by a stuck relay on the control board or a faulty cooling fan. 5 Elite Techs Verified | Oven | |
| F5 | Evaporator fan motor fault Info: The fan that circulates cold air inside the freezer/refrigerator is not working due to obstruction or motor failure. | Refrigerator | |
| F7 | Motor fault Info: Motor is blocked, motor's tacho connection is loose, motor brushes are worn out, or the motor control board is faulty. | Washing Machine | |
| F8 | Door lock fault Info: The motorized door lock mechanism has failed to either lock or unlock the door correctly. | Oven | |
| F9 | Diverter valve error Info: The valve that switches water flow between the upper and lower spray arms is jammed or has failed. | Dishwasher | |
| H | Humidity sensor needs cleaning Info: Lint and fabric softener residue have built up on the metal humidity sensor strips inside the drum, preventing accurate readings. | Tumble Dryer | |
| HD | Humidity sensor fault Info: The humidity sensor, often used for crisper drawer climate control, has failed. | Refrigerator | |
| Unb | Unbalanced load detected Info: Laundry is gathered on one side of the drum, causing an imbalance during the spin cycle. | Washing Machine |
