Riber Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Riber home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
39 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| AL01 | Dishwasher alarm sounds and cycle stops. Info: Alternate code for water leak detected in the base, activating the AquaStop float switch. | Dishwasher | |
| E01 | Door cannot be locked, cycle won't start. Info: The door lock mechanism is faulty or the wiring to the lock is damaged. | Washing Machine | |
| E1 | Hob shuts down during use and shows E1. Info: The internal electronics have overheated. | Hob | |
| E02 | Washing machine is not filling with water. Info: Water inlet valve is faulty, water supply is turned off, or the inlet hose is kinked or blocked. | Washing Machine | |
| E2 | A specific cooking zone shuts off and displays E2. Info: The temperature sensor for the ceramic glass above the cooking zone has detected excessive heat. | Hob | |
| E03 | Water is not draining from the drum. Info: The drain pump filter is clogged, the drain hose is blocked or kinked, or the drain pump has failed. | Washing Machine | |
| E3 | Hob does not work and displays E3 upon power-up. Info: The incoming mains voltage is too high or too low for the appliance. | Hob | |
| E04 | Machine has overfilled with water or is leaking. Info: Pressure switch (water level sensor) is faulty, or the water inlet valve is stuck open. | Washing Machine | |
| E4 | Hob beeps and shows E4, zones may not heat correctly. Info: Communication error between the touch control interface and the main power module. | Hob | |
| E05 | Water is not heating up. Info: The NTC (temperature sensor) is providing an incorrect reading or has failed. | Washing Machine | |
| E06 | Drum is not turning. Info: Motor fault detected by the main control board, often a motor triac failure. | Washing Machine | |
| E6 | A specific zone does not work and shows E6. Info: A fault with the power relay or sensor for a specific cooking zone has been detected. | Hob | |
| E07 | Drum turns erratically or spins at high speed then stops. Info: Fault with the motor tacho generator, which measures the drum's speed. | Washing Machine | |
| E08 | Machine trips the circuit breaker or does not heat water. Info: The heating element has failed or has an earth leakage fault. | Washing Machine | |
| E9 | Ice maker issues, such as not filling or not harvesting ice. Info: Fault detected with the ice maker's position or hall sensor. | Refrigerator | |
| E10 | Machine is taking too long to fill with water. Info: Low water pressure, blocked inlet hose filter, or faulty pressure switch. | Washing Machine | |
| E12 | Machine stops with water inside, may show a leak symbol. Info: Similar to E04, this indicates the anti-flood system in the base has been triggered by a leak. | Washing Machine | |
| E21 | Drainage is very slow or has timed out. Info: Severe blockage in the drain pump or outlet hose, preventing efficient draining. | Washing Machine | |
| E40 | Cycle does not start, door seems closed but machine doesn't register it. Info: A generic door lock mechanism failure, covering the switch, solenoid, or wiring. | Washing Machine | |
| F | A flashing 'F' symbol appears when trying to use an induction zone. Info: No pan is detected, the pan is not suitable for induction, or the pan is not centered correctly on the zone. | Hob | |
| F01 | Oven temperature is inaccurate or it overheats. Info: Oven temperature sensor (NTC) is faulty, likely an open circuit. | Oven | |
| F1 | Freezer temperature is not correct, alarm may sound. Info: The freezer compartment's air temperature sensor (thermistor) has failed. | Refrigerator | |
| F02 | Oven does not heat at all or shows very low temperature. Info: Oven temperature sensor (NTC) has a short circuit. | Oven | |
| F2 | Fridge compartment is too warm or too cold. Info: The fresh food (refrigerator) compartment's air temperature sensor has failed. | Refrigerator | |
| F03 | Oven door will not unlock after pyrolytic cleaning. Info: The door lock mechanism has failed, or the control board is not sending the signal to unlock. | Oven | |
| F3 | Excessive frost buildup in the freezer, poor cooling. Info: The defrost system's temperature sensor (on the evaporator) has failed. | Refrigerator | |
| F04 | Oven is completely dead or has intermittent power. Info: Failure of the main relay on the power control board. | Oven | |
| F4 | Freezer is completely iced up and not cooling. Info: The defrost heater element has failed, preventing the appliance from melting frost off the evaporator coils. 5 Elite Techs Verified | Refrigerator | |
| F05 | Oven shuts down during use, display shows F05. Info: Overheating detected by the safety thermostat, often due to a failed cooling fan. | Oven | |
| F5 | Ice maker is not producing ice. Info: A fault has been detected with the ice maker assembly, motor, or sensors. | Refrigerator |