| F08 | Heating relay fault Info: The relay that controls the heating element is stuck in the on position on the main control board. | Washing Machine | |
| F8 | Incorrect cookware or no cookware detected Info: The pan is not suitable for induction, is too small for the cooking zone, or is not positioned correctly. Or, no pan is on the zone. | Hob | |
| F13 | Water distributor fault Info: The water distributor (alternating spray arm motor) is blocked or defective. | Dishwasher | |
| F14 | Electronic control board error Info: The main electronic control board has an internal fault or has failed. | Washing Machine | |
| F22 | Pressure sensor fault Info: The pressure sensor (analogue) is providing an out-of-range reading, indicating a fault with the sensor itself or a blockage in its tubing. | Dishwasher | |
| iC0 | Communication error Info: A communication breakdown has occurred between the main control unit and the user interface or other components. | Dishwasher | |
| i10 | Water inlet fault Info: No water is entering the appliance. The tap may be closed, the inlet hose kinked, or the filter blocked. | Dishwasher | |
| i20 | Drainage fault Info: Water is not being pumped out correctly. The filters are dirty, the drain hose is blocked or kinked, or the drain pump is jammed. | Dishwasher | |
| i30 | Anti-flood system activated Info: Water has leaked into the base of the dishwasher, tripping the safety float switch. | Dishwasher | |
| i50 | Wash pump or circulation pump fault Info: The circulation pump motor is drawing too much current or is not running. It could be blocked or electronically faulty. | Dishwasher | |
| i60 | Heating fault Info: The water is not heating up. This can be caused by a faulty heating element, a defective NTC temperature sensor, or a problem on the main control board. | Dishwasher | |
