| E01 | Door Lock Fault Info: The machine's door is not properly closed or the door lock mechanism is faulty. | Washing Machine | |
| E1 | Freezer Sensor Failure Info: The temperature sensor (thermistor) in the freezer compartment is faulty (open or short circuit). | Refrigerator | |
| E02 | Water Inlet Fault Info: The machine is not filling with water, or the water level is too low after the filling time has elapsed. | Washing Machine | |
| E2 | Refrigerator Sensor Failure Info: The temperature sensor (thermistor) in the fresh food compartment is faulty (open or short circuit). | Refrigerator | |
| E03 | Drain Fault Info: The machine has failed to drain the water from the drum within the allowed time. | Washing Machine | |
| E04 | Overfill / Water Leak Info: Too much water has entered the drum, or a leak has been detected in the base, activating the anti-flood switch. | Washing Machine | |
| E4 | Defrost Heater Failure Info: The defrost system is not working, leading to ice buildup on the evaporator coils. | Refrigerator | |
| E05 | Heating Fault Info: The water is not reaching the correct temperature. This is likely due to a faulty heating element or NTC temperature sensor. | Washing Machine | |
| E06 | Motor Fault Info: The motor is not turning or is not receiving the correct signals. Often caused by worn carbon brushes or a faulty tacho coil. | Washing Machine | |
| E08 | Unbalanced Load Info: The machine has detected an uneven distribution of laundry in the drum during a spin cycle. | Washing Machine | |
| F1 | Flooding Detected Info: The anti-flood switch in the base of the dishwasher has been activated by a water leak. | Dishwasher | |
| F2 | Oven Temperature Sensor Fault Info: The oven's temperature sensor (probe/thermistor) is short-circuited or has failed. | Oven | |
| F3 | Communication Error Info: The main control board cannot communicate with the display board or other electronic components. | Oven | |
| F4 | Door Lock Failure Info: The motorized door lock for the self-clean cycle is not working correctly. | Oven | |
| F5 | Water Inlet Timeout Info: The dishwasher has failed to fill with a sufficient amount of water. | Dishwasher | |
| F6 | Heating Sensor (NTC) Fault Info: The NTC temperature sensor has an open circuit, indicating it is faulty. | Dishwasher | |
| F8 | Heating Element Fault Info: The dishwasher is not heating the water, likely due to a failed heating element. | Dishwasher | |
| F9 | Diverter Valve Error Info: The diverter valve, which directs water to the spray arms, is not in the correct position or is jammed. | Dishwasher | |
