| E0 | Ambient temperature sensor fault Info: The sensor measuring the room temperature is faulty, which can affect the cooling cycle. | Refrigerator | |
| E4 | Freezer defrost sensor fault Info: The defrost sensor in the freezer compartment has failed, which can lead to ice buildup. | Refrigerator | |
| E9 | Ice maker fault Info: A problem has been detected with the ice maker module or its motor. | Refrigerator | |
| F-1 | Temperature sensor open circuit Info: The oven's temperature sensor (NTC) is disconnected or has failed. | Oven | |
| F01 | Water inlet fault Info: The water tap is closed, the inlet hose is bent or blocked, or water pressure is too low. | Washing Machine | |
| F1 | Refrigerator compartment sensor fault Info: The temperature sensor in the main refrigerator section is faulty. | Refrigerator | |
| F2 | Water leak detected Info: Water has collected in the base of the dishwasher, activating the anti-flood switch. | Dishwasher | |
| F-3 | Temperature sensor short circuit Info: The oven's temperature sensor (NTC) has short-circuited. | Oven | |
| F03 | Draining fault Info: The drain pump filter is clogged, or the drain hose is blocked or kinked. | Washing Machine | |
| F3 | Draining issue Info: The dishwasher is not draining water correctly. Filters are blocked or the drain hose is kinked. | Dishwasher | |
| F-4 | Oven overheating Info: The oven has detected a temperature that is dangerously high, likely due to a faulty sensor or a stuck relay on the control board. | Oven | |
| F5 | Insufficient water Info: Similar to F12, the machine has detected not enough water has entered for the program. This could be due to low water pressure. | Dishwasher | |
| F07 | Motor fault Info: A fault has been detected with the main drive motor or the control board that operates it. | Washing Machine | |
| F-8 | Door lock failure Info: There is a problem with the motorized door lock, often related to the self-cleaning cycle. | Oven | |
| F8 | Heating element failure Info: The appliance has detected a fault with the water heating element. | Dishwasher | |
| F12 | Water inlet fault Info: Dishwasher is not filling with water. The water tap may be off, the inlet hose blocked, or the water inlet valve has failed. | Dishwasher | |
| F13 | Door lock fault Info: The door is not closed correctly, or the door lock mechanism is faulty. | Washing Machine | |
| F24 | Overflow fault Info: The water level has exceeded the maximum safe level, often due to a faulty water inlet valve or pressure sensor. | Washing Machine | |
| H | High temperature alarm Info: The internal temperature of a compartment is too high. This is normal after initial setup, a power outage, or adding large amounts of warm food. It can also indicate a door left ajar. | Refrigerator | |
| UNB | Unbalanced load Info: Laundry inside the drum is not distributed evenly, causing excessive vibration during the spin cycle. | Washing Machine | |
