| E01 | Washing machine cycle will not start, door does not lock Info: The door lock mechanism has failed, or there is a problem with the wiring to the lock. | Washing Machine | |
| E1 | Refrigerator compartment temperature is incorrect Info: The temperature sensor for the fresh food (refrigerator) section is faulty. | Refrigerator | |
| ER1 | Oven fails to heat or shows incorrect temperature Info: The oven's temperature sensor (probe/thermistor) is faulty, providing an incorrect reading to the control board. | Oven | |
| E02 | Washing machine is not filling with water Info: Water fill timeout. This can be due to a closed water tap, kinked inlet hose, blocked filter in the hose, or a faulty water inlet valve. | Washing Machine | |
| E2 | Freezer compartment temperature is incorrect Info: The temperature sensor for the freezer section is faulty. | Refrigerator | |
| ER2 | Oven shuts down during operation and displays error Info: Overheating condition detected. This is commonly caused by a failed cooling fan or blocked ventilation slots. | Oven | |
| E03 | Water is left in the drum and will not drain out Info: Drain timeout. The drain pump filter is blocked, the drain hose is kinked, or the drain pump has failed. | Washing Machine | |
| E3 | Excessive frost buildup in freezer, poor cooling performance Info: The defrost system sensor is faulty, preventing the appliance from running its automatic defrost cycle correctly. | Refrigerator | |
| ER3 | Oven is unresponsive, display shows error Info: Communication failure between the main control board and the display module. | Oven | |
| E4 | Program stops, water temperature incorrect Info: A fault with the temperature sensor (NTC), which is either open circuit or short circuit. | Dishwasher | |
| ER4 | Pyrolytic cleaning cycle won't start, or oven door won't open after cycle Info: Fault with the motorized door lock mechanism or the door lock microswitch. | Oven | |
| E05 | Washing machine is not heating the water Info: Fault with the water temperature sensor (NTC). | Washing Machine | |
| E07 | The drum does not turn or spin Info: A fault with the main drive motor. Common causes include worn motor carbon brushes or a failure of the motor's tacho sensor. | Washing Machine | |
| E8 | Dishes are not being cleaned properly on one rack Info: The diverter valve, which directs water to the upper and lower spray arms, is jammed or has failed. | Dishwasher | |
| F8 | Error shown when attempting to use the meat probe function Info: The meat probe is not plugged in correctly, is faulty, or the socket is damaged. | Oven | |
| H | High temperature alarm is active, icon or 'H' on display Info: The internal temperature in one of the compartments is too high. This can be caused by a door being left ajar, loading with warm food, or a cooling system failure. | Refrigerator | |
| STOP | The word 'STOP' is flashing on the oven display Info: The oven has entered a safe mode, usually after a power interruption during a self-cleaning cycle or a door lock error. | Oven | |
