Atlantic Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Atlantic home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
52 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| AL01 | Boiler operation stopped, low pressure alert Info: System water pressure has dropped below the minimum operating level. | Boiler | |
| AL02 | Problem with domestic hot water temperature Info: The domestic hot water (DHW) sensor (probe) is faulty or has a bad connection. | Boiler | |
| AL03 | Problem with central heating temperature Info: The central heating (CH) sensor (probe) is faulty or has a bad connection. | Boiler | |
| AL06 | Boiler lockout related to flue safety Info: The flue gas temperature sensor (probe) has detected an issue or has failed. | Boiler | |
| EC | Communication error between boards Info: A communication link between the main control board and the display board has been lost. | Refrigerator | |
| EF | Evaporator fan motor error Info: The fan that circulates cold air inside the freezer has failed or is blocked by ice. | Refrigerator | |
| E01 | Ignition failure, boiler will not start Info: No gas supply, faulty ignition electrode, or blocked condensate drain. | Boiler | |
| E1 | Refrigerator compartment sensor fault Info: The temperature sensor for the fresh food section has failed. | Refrigerator | |
| Er 01 | Unit is not heating or cooling Info: Communication error between the indoor and outdoor units. | Heat Pump | |
| E02 | Boiler overheated and locked out Info: Poor water circulation, blocked pump, or faulty overheat thermostat. | Boiler | |
| E2 | Freezer compartment sensor fault Info: The temperature sensor for the freezer section has failed. | Refrigerator | |
| E03 | Flue or fan fault Info: Blockage in the flue, faulty fan, or air pressure switch failure. | Boiler | |
| E3 | Dishes are still dirty and wet after cycle / Water is cold Info: The dishwasher is not heating the water. The cause is likely a failed heating element or a faulty NTC temperature sensor. | Dishwasher | |
| E04 | Low water pressure Info: Water pressure in the heating system is too low, possibly due to a leak. | Boiler | |
| E4 | Dishwasher has too much water inside / Overfills Info: The water level control system is malfunctioning. This could be a faulty pressure sensor, a blocked sensor hose, or a water inlet valve that is stuck open. | Dishwasher | |
| E05 | The wash cycle is cold / Water does not heat up Info: There is a fault with the water heating system. This is usually a failed heating element or a faulty NTC temperature sensor. | Washing Machine | |
| Er 05 | System has shut down, high pressure fault Info: High refrigerant pressure. Outdoor unit coil is blocked/dirty, fan is not working, or system is overcharged. | Heat Pump | |
| E06 | The drum does not turn or spins erratically Info: A motor circuit fault. The most common cause is worn out carbon brushes on the motor. It can also be a faulty tacho coil on the motor or a bad connection. | Washing Machine | |
| Er 06 | System has shut down, low pressure fault Info: Low refrigerant pressure, indicating a possible refrigerant leak or a blockage in the system. | Heat Pump | |
| E8 | Ice maker sensor fault Info: The sensor for the automatic ice maker is malfunctioning. | Refrigerator | |
| E09 | Machine is dead or trips the circuit breaker Info: Indicates a short circuit in the motor control section (triac) of the main electronic control board. | Washing Machine | |
| E10 | Water inlet problem Info: Water tap is closed, inlet hose is kinked, or water pressure is too low. | Washing Machine | |
| Er 10 | No hot water or takes too long to heat Info: The main heating element has failed or is covered in limescale. | Water Heater | |
| Er 11 | Water is dangerously hot, system locked out Info: Overheating detected by the safety thermostat, likely due to a faulty main thermostat. 1 Elite Techs Verified | Water Heater | |
| Er 15 | Anti-corrosion system fault Info: Fault with the ACI (Anti-Corrosion Integrated) electronic anode system. | Water Heater | |
| E20 | Drainage fault, water not emptying Info: The drain pump filter is blocked, drain hose is kinked or blocked. | Washing Machine | |
| E21 | Water is not draining or draining too slowly Info: Partial blockage in the drain filter or drain hose. Faulty drain pump. | Dishwasher | |
| Er 21 | Heater stops working, dry fire protection Info: The system detected that the heating element was energized without being submerged in water. | Water Heater | |
| Er 24 | Inaccurate temperature control Info: Fault detected with the upper temperature sensor (NTC). | Water Heater | |
| E25 | Circulation fault or pump blockage Info: Primary water circulation is poor. The pump may be blocked or has failed. | Boiler |