Bluesky Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Bluesky home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
15 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| E01 | Door lock fault Info: The door is not closed properly, the door latch is broken, or the door lock mechanism (interlock) is faulty. | Washing Machine | |
| E1 | Water inlet timeout Info: The dishwasher has not filled with water within the expected time. The water tap may be off, the inlet hose kinked, or the water inlet valve has failed. | Dishwasher | |
| E02 | Water fill timeout Info: The machine has failed to fill with the required amount of water in the allotted time. This can be due to a closed water tap, kinked inlet hose, blocked filter in the inlet valve, or a faulty water inlet valve or pressure switch. | Washing Machine | |
| E03 | Drain fault / Water not leaving Info: The machine has failed to drain the water. The drain pump filter is blocked, the drain hose is kinked or blocked, or the drain pump motor is faulty. | Washing Machine | |
| E04 | Overfill error / Leaking Info: Too much water has entered the drum, or the anti-flood sensor in the base has been activated by a leak. Often caused by a faulty pressure switch or a stuck water inlet valve. | Washing Machine | |
| E4 | Overfill or leak detected Info: The dishwasher has too much water inside, or the flood protection switch in the base has detected a leak. | Dishwasher | |
| E05 | Temperature sensor (NTC) fault Info: The control board is not receiving a correct reading from the water temperature sensor (NTC). The sensor or its wiring is faulty. | Washing Machine | |
| E06 | Motor fault Info: A fault has been detected with the main drive motor. This is commonly due to worn carbon brushes, a faulty tacho coil, or a wiring issue. | Washing Machine | |
| E09 | Unbalanced load Info: The laundry load is not distributed evenly in the drum, preventing a safe high-speed spin. Can also indicate worn shock absorbers. | Washing Machine | |
| F1 | Oven temperature sensor error Info: The main control board has detected an issue with the oven temperature probe (NTC sensor), such as an open or short circuit. | Oven | |
| F2 | Refrigerator sensor fault Info: The temperature sensor in the fresh food (fridge) compartment is faulty. | Refrigerator | |
| F3 | Door lock mechanism fault Info: A problem with the oven door lock, often related to the self-clean cycle. The lock motor may be jammed or the microswitch may have failed. | Oven | |
| F4 | Defrost heater failure Info: The defrost heating element is not working, which prevents the appliance from removing ice from the evaporator coil. 5 Elite Techs Verified | Refrigerator | |
| F5 | Insufficient water Info: The water level sensor has detected that not enough water has entered the machine for the cycle to run correctly. | Dishwasher | |
| F8 | Control panel communication error / Overheating Info: Can indicate a failure of the electronic control unit or an overheating condition has been detected near the electronics. | Oven |