Franke Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Franke home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
17 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| AL01 | Dishwasher leak detected Info: The flood protection system (AquaStop) has been activated. There is water in the base tray of the appliance. | Dishwasher | |
| E1 | Freezer compartment not cooling correctly Info: Freezer temperature sensor (NTC) fault. The sensor is providing incorrect readings to the control board. | Refrigerator | |
| E2 | Water not draining from the dishwasher Info: Drainage fault. The filter is blocked, the drain pump is jammed, or the drain hose is kinked or blocked. | Dishwasher | |
| E3 | Water is not heating up Info: Heating element or wiring fault. The machine is unable to heat the water to the required temperature. | Dishwasher | |
| E4 | Overfill or leak detected Info: The anti-flood switch in the base has been activated, usually due to a leak, or the pressure switch has malfunctioned, causing the machine to overfill. | Dishwasher | |
| E6 | Poor wash results, spray arms not rotating Info: Water diverter valve fault. This valve directs water to the upper or lower spray arms and is not functioning correctly. | Dishwasher | |
| F1 | Oven temperature sensor error Info: Open circuit in the temperature sensor (NTC). The sensor is disconnected or has failed. | Oven | |
| F2 | Washing machine is not draining Info: Drain fault. The drain pump filter is clogged, the pump is blocked, or the drain hose is obstructed. | Washing Machine | |
| F3 | Oven is overheating Info: Overheating detected by the control board. This could be a stuck heating element relay, a faulty temperature sensor, or a malfunctioning cooling fan. | Oven | |
| F4 | Washing machine pressure switch fault Info: Pressure switch fault. The switch is stuck on 'empty' or 'full', preventing the cycle from progressing correctly. 5 Elite Techs Verified | Washing Machine | |
| F5 | Washing machine door will not lock or unlock Info: Door lock mechanism fault. The door is not closed properly, or the interlock assembly has failed. | Washing Machine | |
| F6 | Washing machine motor is not turning Info: Motor fault. The motor's tachometer is not sending a signal, the carbon brushes are worn, or there's a wiring issue. | Washing Machine | |
| F7 | Water heats continuously or not at all Info: Heater control fault. The heater relay on the main control board is stuck on or has failed. | Washing Machine | |
| F8 | Oven door lock error Info: Fault with the motorized door lock, typically during or after a pyrolytic cleaning cycle. The lock may be jammed or the motor has failed. | Oven | |
| F11 | Drain pump communication error Info: A communication error between the main control board and the drain pump, or a fault in the pump's wiring. | Washing Machine | |
| F13 | Appliance is unresponsive, shows error on display Info: Control board communication error. The main control board has an internal fault or cannot communicate with another component like the display board. | Washing Machine | |
| H | Alarm sounds and temperature display flashes Info: High temperature alarm. The internal temperature of a compartment is too high. This could be due to the door being left open, a large amount of warm food added, or a cooling system failure. | Refrigerator |