| E0 | Freezer temperature sensor fault Info: The freezer compartment's temperature sensor (thermistor) has failed or its wiring is damaged. | Refrigerator | |
| E1 | Defrost sensor fault Info: The defrost sensor, located on the evaporator coil, has failed. | Refrigerator | |
| E2 | Heater fault Info: The heating element is not working or has failed. | Washing Machine | |
| E3 | Refrigerator temperature sensor fault Info: The fresh food compartment's temperature sensor has failed or has a bad connection. | Refrigerator | |
| E4 | Defrost heater fault Info: The defrost heating element is not working, which leads to excessive ice buildup on the evaporator coils. | Refrigerator | |
| E5 | Water not draining Info: The drain filter is clogged, the drain pump is faulty, or the drain hose is blocked/kinked. | Washing Machine | |
| E6 | Motor fault Info: Motor is not turning. Most commonly caused by worn motor carbon brushes. | Washing Machine | |
| E9 | Ice maker fault Info: The automatic ice maker mechanism has failed or is jammed. | Refrigerator | |
| E17 | Excessive foam detected Info: Too much detergent has been used, or a non-HE detergent was used in a high-efficiency machine. | Washing Machine | |
| E18 | Unbalanced load Info: The laundry inside the drum is not distributed evenly, causing excessive vibration during the spin cycle. | Washing Machine | |
| F2 | Oven overheating / NTC sensor fault Info: The oven's NTC temperature sensor has failed in an open-circuit state. | Oven | |
| F3 | Overheating detected Info: The NTC sensor reading is too high, the cooling fan has failed, or the sensor itself is faulty. | Oven | |
| F5 | Door lock error during self-clean Info: The door lock mechanism has failed to engage or disengage for the pyrolytic cleaning cycle. | Oven | |
| F8 | Door lock mechanism error Info: The door lock motor is disconnected, jammed, or has failed electrically. | Oven | |
| H1 | Water leakage detected Info: Water has collected in the base of the machine, activating the anti-flood float switch. | Dishwasher | |
| H2 | Water inlet fault Info: The dishwasher is not filling with water due to a faulty inlet valve, kinked hose, or no water supply. | Dishwasher | |
| H4 | Water not heating Info: A fault with the main heating element or the NTC temperature sensor. | Dishwasher | |
| H5 | Water drainage fault Info: The dishwasher is not draining due to blocked filters, a faulty drain pump, or a blocked drain hose. | Dishwasher | |
| H6 | Temperature sensor fault Info: The NTC (temperature sensor) has an open or short circuit. | Dishwasher | |
