| A Flashing | Light 'A' is flashing on the cooker hood display. Info: The grease filter saturation alarm has been triggered. This is a timed reminder. | Cooker Hood | |
| C Flashing | Light 'C' is flashing on the cooker hood display after filter maintenance. Info: The filter saturation alarm system needs to be reset after cleaning or replacing the filters. | Cooker Hood | |
| E1 | Extractor hood is not working, E1 is displayed. Info: Communication error between the main control board and the motor. | Cooker Hood | |
| E2 | Hob shows error E2. Info: Temperature sensor is faulty or disconnected. | Induction Hob | |
| E3 | Hob is not working and displays E3. Info: The mains voltage is too high (overvoltage protection). | Induction Hob | |
| E4 | Hob is not working and displays E4. Info: The mains voltage is too low (undervoltage protection). | Induction Hob | |
| Er4 | Error code ER4 is displayed on the hob. Info: The Bridge Zone function has been activated, but the pots are not placed correctly to span the two linked zones. | Induction Hob | |
| E6 | One or more cooking zones are not working, E6 displayed. Info: Communication error between the touch control board and the power module. | Induction Hob | |
| E9 | Hob is completely inoperable and displays E9. Info: General internal hardware fault or configuration error. | Induction Hob | |
| F Flashing | Light 'F' is flashing on the cooker hood display. Info: The charcoal/odor filter saturation alarm has been triggered. This is a timed reminder for non-ducted hoods. | Cooker Hood | |
| F0 | Cooking zone does not turn on and F0 is displayed. Info: No pan is detected, the pan is not suitable for induction, or the pan is not correctly positioned on the cooking zone. | Induction Hob | |
| F01 | Oven is not heating correctly and displays F01. Info: The oven temperature sensor (NTC) is defective or has an open circuit. | Oven | |
| F1 | A continuous beep is heard and F1 is displayed. Info: The cooking zone has been active for an extremely long time without change, or the pan is empty and has overheated. | Induction Hob | |
| F2 | Hob switches off and displays F2. Info: The hob electronics have overheated. This can be caused by prolonged use at high power or poor ventilation below the hob. | Induction Hob | |
| F03 | Oven displays F03 and may not start a cycle. Info: Error with the door lock mechanism. The door is not locking or unlocking correctly, or the door switch is faulty. | Oven | |
| F4 | Hob does not work correctly and shows F4. Info: Incorrect mains voltage detected or a power surge has occurred. | Induction Hob | |
| F5 | Controls are unresponsive and F5 is displayed. Info: The touch control panel is covered by an object (e.g., cloth, utensil) or a liquid spillage. | Induction Hob | |
| F6 | One side of the hob (left or right) stops working and displays F6. Info: Overheating of the power module for one side of the hob. | Induction Hob | |
| F7 | Hob displays F7 and may beep. Info: A fault with the temperature sensor (NTC) for a cooking zone has been detected. | Induction Hob | |
| F8 | Cooking zone stops heating and shows F8. Info: Cookware bottom is deformed or does not have a perfectly flat base, causing poor contact and overheating. | Induction Hob | |
| F9 | Hob shows error F9. Info: Internal voltage error on the electronic board. | Induction Hob | |
