Ilve Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Ilve home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
17 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| E01 | Washing machine cycle will not start, door does not lock Info: The door lock mechanism has failed, or there is a problem with the wiring to the lock. | Washing Machine | |
| E1 | Refrigerator compartment temperature is incorrect Info: The temperature sensor for the fresh food (refrigerator) section is faulty. | Refrigerator | |
| ER1 | Oven fails to heat or shows incorrect temperature Info: The oven's temperature sensor (probe/thermistor) is faulty, providing an incorrect reading to the control board. | Oven | |
| E02 | Washing machine is not filling with water Info: Water fill timeout. This can be due to a closed water tap, kinked inlet hose, blocked filter in the hose, or a faulty water inlet valve. | Washing Machine | |
| E2 | Freezer compartment temperature is incorrect Info: The temperature sensor for the freezer section is faulty. | Refrigerator | |
| ER2 | Oven shuts down during operation and displays error Info: Overheating condition detected. This is commonly caused by a failed cooling fan or blocked ventilation slots. | Oven | |
| E03 | Water is left in the drum and will not drain out Info: Drain timeout. The drain pump filter is blocked, the drain hose is kinked, or the drain pump has failed. | Washing Machine | |
| E3 | Excessive frost buildup in freezer, poor cooling performance Info: The defrost system sensor is faulty, preventing the appliance from running its automatic defrost cycle correctly. | Refrigerator | |
| ER3 | Oven is unresponsive, display shows error Info: Communication failure between the main control board and the display module. | Oven | |
| E4 | Program stops, water temperature incorrect Info: A fault with the temperature sensor (NTC), which is either open circuit or short circuit. | Dishwasher | |
| ER4 | Pyrolytic cleaning cycle won't start, or oven door won't open after cycle Info: Fault with the motorized door lock mechanism or the door lock microswitch. | Oven | |
| E05 | Washing machine is not heating the water Info: Fault with the water temperature sensor (NTC). | Washing Machine | |
| E07 | The drum does not turn or spin Info: A fault with the main drive motor. Common causes include worn motor carbon brushes or a failure of the motor's tacho sensor. | Washing Machine | |
| E8 | Dishes are not being cleaned properly on one rack Info: The diverter valve, which directs water to the upper and lower spray arms, is jammed or has failed. | Dishwasher | |
| F8 | Error shown when attempting to use the meat probe function Info: The meat probe is not plugged in correctly, is faulty, or the socket is damaged. | Oven | |
| H | High temperature alarm is active, icon or 'H' on display Info: The internal temperature in one of the compartments is too high. This can be caused by a door being left ajar, loading with warm food, or a cooling system failure. | Refrigerator | |
| STOP | The word 'STOP' is flashing on the oven display Info: The oven has entered a safe mode, usually after a power interruption during a self-cleaning cycle or a door lock error. | Oven |