Zanussi Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Zanussi home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
41 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| ,20 | Drainage fault (display variant) Info: A display variant of the i20 error. The dishwasher is not draining due to blocked filters or a blocked/kinked drain hose. | Dishwasher | |
| AL03 | High freezer temperature alarm Info: The temperature inside the freezer has risen above the safe storage level. This can be caused by a door left open, power failure, or a system fault. | Refrigerator | |
| AL5 | Door is open Info: The dishwasher cycle will not start because the door is not correctly latched. | Dishwasher | |
| C1 | Water fill timeout Info: The machine has failed to fill with water in the allotted time. Similar to E10. | Washing Machine | |
| C2 | Drain pump fault Info: The machine has failed to drain water in the allotted time. Similar to E20. | Washing Machine | |
| C9 | Motor tacho fault / imbalance Info: An imbalance in the drum has been detected, or there is an issue with the motor's speed sensor (tacho). | Washing Machine | |
| DEMO | Demonstration mode is active Info: The oven is in demo mode, where controls and lights work but there is no heating. | Oven | |
| Door Open Alarm | Beeping or light indicates door is ajar Info: The refrigerator or freezer door has not been closed completely. | Refrigerator | |
| EF0 | Leak detected / Aquastop activated Info: A leak has been detected in the base of the machine, activating the anti-flood system. | Washing Machine | |
| EH0 | Power supply fault Info: The voltage or frequency of the power supply is incorrect or unstable. | Washing Machine | |
| E1 | Electronics overheating Info: The internal electronics of the hob are too hot, possibly due to prolonged use on high power or poor ventilation. | Induction Hob | |
| E3 | Incorrect voltage supply Info: The hob has detected that the incoming mains voltage is too high or too low. | Induction Hob | |
| E4 | Cooking zone overheating Info: A cooking zone has overheated, often because an empty pan was left on high heat. | Induction Hob | |
| E6 | Sensor communication fault Info: One of the cooking zone sensors is not communicating with the main control board. | Induction Hob | |
| E8 | Cooling fan fault Info: There is a communication error between the main board and the cooling fan, or the fan itself is blocked or faulty. | Induction Hob | |
| E9 | Configuration error Info: There is a software or configuration error on the main control board. | Induction Hob | |
| E10 | Water inlet fault Info: The appliance is not taking in water or not taking in enough water. This could be due to a closed tap, kinked inlet hose, or a blocked filter in the hose. | Washing Machine | |
| E20 | Draining fault Info: The appliance is not draining water. The drain filter may be blocked, the drain hose could be kinked or blocked, or the drain pump is faulty. | Washing Machine | |
| E22 | Condenser draining fault Info: The appliance is unable to drain water from the condenser during a drying cycle. | Washer Dryer | |
| E24 | Drain circuit problem Info: A problem has been detected in the drain circuit, but not necessarily a blockage. It could be an issue with the wiring to the pump or the control board. | Washing Machine | |
| E40 | Door lock fault Info: The door is not closed properly or the door lock mechanism is faulty. | Washing Machine | |
| E52 | Motor Fault Info: Issue with the main drive motor, its tacho signal, or the connection to the control board. | Washing Machine | |
| E60 | Heating fault Info: The appliance is not heating the water correctly. This is usually caused by a faulty heating element or temperature sensor. | Washing Machine | |
| E90 | Configuration / communication fault Info: There is a communication error between the electronic components of the appliance. | Washing Machine | |
| F | No pan detected Info: There is no pan on the cooking zone, the pan is not suitable for induction, or the pan is not centered correctly. | Induction Hob | |
| F1 | Freezer sensor failure Info: The temperature sensor in the freezer compartment is faulty. | Refrigerator | |
| F2 | Refrigerator sensor failure Info: The temperature sensor in the refrigerator compartment is faulty. | Refrigerator | |
| F3 | Evaporator sensor failure Info: The defrost or evaporator sensor is faulty, which can affect the automatic defrost cycle. | Refrigerator | |
| F4 | Meat probe sensor fault Info: The meat probe is not connected correctly or the probe itself is faulty. 5 Elite Techs Verified | Oven | |
| F5 | Control board fault / Overheating Info: The main electronic control board has detected an internal fault or is overheating, possibly due to a failed cooling fan. | Oven |