Zoppas Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Zoppas home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
44 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| -- | Flashing dashes on the display Info: Indicates a temperature sensor has failed, and the appliance cannot display a temperature. | Refrigerator | |
| AL5 | Water inlet timeout Info: Alternative code for i10. The machine did not fill with water in the expected time. | Dishwasher | |
| AL6 | Drainage timeout Info: Alternative code for i20. The dishwasher failed to drain the water within the set time. | Dishwasher | |
| C1 | Water fill time error Info: Legacy code for i10. Appliance is not filling with water. | Dishwasher | |
| C2 | Water drain time error Info: Legacy code for i20. Appliance is not draining water correctly. | Dishwasher | |
| C3 | Leak or anti-flood error Info: Legacy code for i30. Water has been detected in the base of the appliance. | Dishwasher | |
| DEMO | Oven appears to work but does not heat Info: The oven is in 'Demo' or 'Shop' mode, used for showroom display. | Oven | |
| EF0 | Leak detected or anti-flood system activated Info: Water has leaked into the base of the machine, activating the flood protection switch. Can also be caused by over-foaming. | Washing Machine | |
| EH0 | Power supply problem Info: The main control board detects an issue with the mains power supply, such as incorrect voltage or frequency. | Washing Machine | |
| E1 | Hob electronics are overheating Info: Internal electronics have exceeded their safe operating temperature, possibly due to blocked ventilation. | Hob | |
| EH1 | Power supply frequency out of range Info: The frequency of the mains power supply is not within the appliance's operating parameters. | Washing Machine | |
| E3 | Incorrect voltage Info: The hob is receiving a voltage that is outside its specified range. | Hob | |
| E4 | Cooking zone has overheated Info: A cooking zone has overheated, often from an empty pan being left on high heat. | Hob | |
| E5 | Communication fault Info: There is a communication error between the control panel and the power module. 5 Elite Techs Verified | Hob | |
| E6 | Sensor failure Info: One of the power modules or temperature sensors for a cooking zone has failed. | Hob | |
| E8 | Ventilation error Info: The hob's internal cooling fan is not working correctly, or the air vents are blocked. | Hob | |
| E9 | Internal electronics error Info: General internal fault on one of the electronic boards. | Hob | |
| E10 | Water fill problem, not taking in water Info: The water tap may be closed, the inlet hose could be kinked or blocked, or the inlet valve is faulty. | Washing Machine | |
| E20 | Draining problem, water not pumping out Info: The drain pump filter is blocked, the drain hose is kinked or blocked, or the drain pump itself is faulty. | Washing Machine | |
| E21 | Difficult drainage Info: The machine is draining, but too slowly. This can be due to a partial blockage in the filter or hose, or a problem with the drain pump. | Washing Machine | |
| E31 | Water level sensor (pressure switch) fault Info: The pressure switch is providing an incorrect frequency signal to the control board. | Washing Machine | |
| E40 | Door lock fault, machine won't start Info: The door is not closed properly, the door lock mechanism is faulty, or there is a wiring issue to the lock. | Washing Machine | |
| E52 | Motor fault, drum not turning Info: No signal from the motor's tacho generator. This can be due to a faulty motor, worn motor brushes, or a wiring problem. | Washing Machine | |
| E61 | Heating fault, water not heating up Info: The heating element has failed, or there is a fault with the temperature sensor (NTC) or wiring. | Washing Machine | |
| E66 | Heating element relay fault Info: The power relay for the heating element on the main control board is faulty (e.g., stuck on). | Washing Machine | |
| E71 | Wash temperature sensor (NTC) fault Info: The resistance of the wash NTC sensor is out of range, indicating it's open or short-circuited. | Washing Machine | |
| E91 | Communication error between electronics Info: There is a communication fault between the main control board and the display board. | Washing Machine | |
| F | Cooking zone flashes 'F' and does not heat Info: No pan is detected, the pan is not suitable for induction, or the pan is not centered correctly on the cooking zone. | Hob | |
| F1 | Display shows F1, temperature issue Info: Fridge compartment sensor has failed. | Refrigerator | |
| F2 | Display shows F2, temperature issue Info: Freezer compartment sensor has failed. | Refrigerator |