Beko Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Beko home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
19 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| E0 | Freezer temperature sensor fault Info: The freezer compartment's temperature sensor (thermistor) has failed or its wiring is damaged. | Refrigerator | |
| E1 | Defrost sensor fault Info: The defrost sensor, located on the evaporator coil, has failed. | Refrigerator | |
| E2 | Heater fault Info: The heating element is not working or has failed. | Washing Machine | |
| E3 | Refrigerator temperature sensor fault Info: The fresh food compartment's temperature sensor has failed or has a bad connection. | Refrigerator | |
| E4 | Defrost heater fault Info: The defrost heating element is not working, which leads to excessive ice buildup on the evaporator coils. | Refrigerator | |
| E5 | Water not draining Info: The drain filter is clogged, the drain pump is faulty, or the drain hose is blocked/kinked. 5 Elite Techs Verified | Washing Machine | |
| E6 | Motor fault Info: Motor is not turning. Most commonly caused by worn motor carbon brushes. | Washing Machine | |
| E9 | Ice maker fault Info: The automatic ice maker mechanism has failed or is jammed. | Refrigerator | |
| E17 | Excessive foam detected Info: Too much detergent has been used, or a non-HE detergent was used in a high-efficiency machine. | Washing Machine | |
| E18 | Unbalanced load Info: The laundry inside the drum is not distributed evenly, causing excessive vibration during the spin cycle. | Washing Machine | |
| F2 | Oven overheating / NTC sensor fault Info: The oven's NTC temperature sensor has failed in an open-circuit state. | Oven | |
| F3 | Overheating detected Info: The NTC sensor reading is too high, the cooling fan has failed, or the sensor itself is faulty. | Oven | |
| F5 | Door lock error during self-clean Info: The door lock mechanism has failed to engage or disengage for the pyrolytic cleaning cycle. | Oven | |
| F8 | Door lock mechanism error Info: The door lock motor is disconnected, jammed, or has failed electrically. | Oven | |
| H1 | Water leakage detected Info: Water has collected in the base of the machine, activating the anti-flood float switch. | Dishwasher | |
| H2 | Water inlet fault Info: The dishwasher is not filling with water due to a faulty inlet valve, kinked hose, or no water supply. 5 Elite Techs Verified | Dishwasher | |
| H4 | Water not heating Info: A fault with the main heating element or the NTC temperature sensor. | Dishwasher | |
| H5 | Water drainage fault Info: The dishwasher is not draining due to blocked filters, a faulty drain pump, or a blocked drain hose. | Dishwasher | |
| H6 | Temperature sensor fault Info: The NTC (temperature sensor) has an open or short circuit. | Dishwasher |