Indesit Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Indesit home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
37 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| A01 | Dishwasher stops and beeps, water in the base Info: Leak detected and anti-flood system activated. | Dishwasher | |
| A1 | Alarm sounds, warning light flashes, freezer is not cold enough Info: The freezer temperature has risen above the safe storage level. | Refrigerator | |
| AL01 | Dishwasher has stopped with water in the base Info: Anti-flood protection has been triggered by a leak. | Dishwasher | |
| A02 | Dishwasher fails to fill with water Info: Water inlet valve (solenoid) fault. | Dishwasher | |
| A2 | Alarm sounds, fridge is not cold enough Info: The refrigerator compartment temperature is too high. | Refrigerator | |
| A03 | Dishwasher does not drain, water left at the bottom Info: Drain timeout. The machine is taking too long to empty the water. | Dishwasher | |
| A04 | Water not heating or cycle takes too long Info: NTC (temperature sensor) fault. The machine cannot read the water temperature correctly. | Dishwasher | |
| A05 | Dishes are not being cleaned properly Info: Pressure switch fault or circulation pump blockage. The machine detects that the spray arms are not rotating correctly. | Dishwasher | |
| A06 | Dishwasher stops early in the cycle, no water inside Info: Water fill timeout. Similar to H20 in washing machines. | Dishwasher | |
| A07 | Water is not being directed to the correct spray arm Info: Diverter valve fault. The device that alternates water flow between the upper and lower spray arms is stuck or faulty. | Dishwasher | |
| A08 | Water is cold, dishes remain dirty Info: Wash heater fault. The heating element is not working. | Dishwasher | |
| A10 | Machine stops and beeps, may not have filled Info: Fill valve or heater circuit error. The board has detected a fault in either the water inlet solenoid or the heating element circuit. | Dishwasher | |
| F01 | Oven is not heating correctly Info: NTC temperature sensor has an open circuit. | Oven | |
| F1 | Fridge temperature is unstable Info: Fault with the refrigerator compartment's temperature sensor (thermistor). | Refrigerator | |
| F02 | Drum does not turn or turns intermittently Info: Motor jammed or tacho disconnected. The control board is not receiving feedback from the motor's speed sensor. | Washing Machine | |
| F2 | Dishwasher has flashing LED 2 and won't fill Info: Water inlet solenoid valve timed out or faulty. | Dishwasher | |
| F03 | Hob beeps and won't respond to touch Info: A touch control button has been pressed for too long, or there is liquid/an object on the control panel. | Hob | |
| F3 | Freezer temperature is unstable Info: Fault with the freezer compartment's temperature sensor (thermistor). | Refrigerator | |
| F04 | Oven is completely unresponsive or displays error Info: Communication error between the main power board and the display/user interface board. | Oven | |
| F05 | Hob cuts out during use Info: Overheating of the internal electronic components. | Hob | |
| F06 | Machine stops, program selector lights flash Info: Door lock or program selector error. This code can indicate an issue with either the door interlock or the main control board's program memory. | Washing Machine | |
| F07 | Water heats continuously or not at all; cycle stops Info: Heater relay stuck on the control board or pressure switch fault. | Washing Machine | |
| F7 | Defrost system not working correctly Info: The evaporator sensor circuit is open. | Refrigerator | |
| F08 | The oven fan is not working or running continuously Info: Oven fan or fan relay fault. | Oven | |
| F09 | Machine is dead, all lights flashing, won't start Info: EEPROM/Setup Error. The main control board's memory has become corrupted or is unprogrammed. | Washing Machine | |
| F10 | Pyrolytic cleaning cycle fails, door won't lock/unlock Info: Door lock motor fault for the pyrolytic cleaning function. | Oven | |
| F11 | Machine stops, usually before the spin cycle Info: Drain pump cannot be activated or has no feedback. The control board is sending power to the pump but not getting a response. | Washing Machine | |
| F12 | Machine is unresponsive, lights may flash Info: Communication error between the main control board and the display board. | Washing Machine | |
| F13 | Drying cycle not working correctly Info: Dryer temperature sensor (NTC) fault. | Washer Dryer | |
| F15 | Clothes are not drying Info: Dryer heater relay fault. The relay on the control board that controls the drying element is not working. | Washer Dryer |