Severin Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Severin home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
39 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| E01 | Door lock fault Info: The door is not correctly closed, or the door lock mechanism (interlock) is faulty or has a bad connection. | Washing Machine | |
| E1 | Zone overheating Info: The temperature sensor for a cooking zone has detected excessive heat, often from a pan boiling dry or unsuitable cookware being used. | Induction Hob | |
| E02 | Water inlet time-out Info: The machine has failed to fill with water in the allotted time. The water tap may be closed, the inlet hose kinked, or the inlet valve filter blocked. | Washing Machine | |
| E2 | Internal electronics overheating Info: The main control board's temperature sensor has detected that the internal electronics are too hot. This is usually due to poor ventilation. | Induction Hob | |
| E03 | Water drain time-out Info: The machine is unable to drain the water. The drain pump filter is blocked, the drain hose is kinked or blocked, or the pump itself has failed. | Washing Machine | |
| E3 | Overvoltage detected Info: The hob has detected that the incoming mains voltage is too high. | Induction Hob | |
| E04 | Overfilling or water level sensor fault Info: The machine has detected too much water in the drum. This is likely caused by a faulty pressure switch (water level sensor) or a blockage in the pressure chamber hose. | Washing Machine | |
| E4 | Undervoltage detected Info: The incoming mains voltage is too low for the hob to operate safely. | Induction Hob | |
| E05 | Heating element or NTC sensor fault Info: The water is not heating. This could be a fault with the heating element itself or the NTC temperature sensor that monitors water temperature. | Washing Machine | |
| E5 | Communication error Info: There is a communication failure between the induction generator board and the user interface/control board. 5 Elite Techs Verified | Induction Hob | |
| E06 | Motor fault Info: The main drive motor is not turning. This can be caused by worn motor carbon brushes, a faulty motor, or a bad connection. | Washing Machine | |
| E6 | Zone sensor fault Info: A temperature sensor for one of the cooking zones is faulty (open or short circuit). | Induction Hob | |
| E08 | Motor speed sensor fault (tacho) Info: The control board is not receiving a speed signal from the motor. The tacho coil on the motor may be dislodged, faulty, or have a bad connection. | Washing Machine | |
| E8 | Cooling fan failure Info: The internal cooling fan for the electronics has failed or is blocked. | Induction Hob | |
| E10 | Water level sensor issue Info: The control board has received an invalid signal from the water level sensor, or the sensor is not detected. | Washing Machine | |
| E21 | Drainage blocked Info: Water is not being pumped out effectively during the spin or drain cycle, often due to a severe blockage. | Washing Machine | |
| E30 | Door lock system error Info: The door lock mechanism has a persistent fault that cannot be cleared by simply opening and closing the door. | Washing Machine | |
| E40 | Power supply fault Info: The main control board is detecting an abnormal voltage from the power supply. | Washing Machine | |
| F | Pan not detected Info: The hob does not recognize the cookware. The pan may be unsuitable (not induction-compatible), too small for the zone, or not centered correctly. | Induction Hob | |
| FE | Water overflow error Info: The water level has exceeded the maximum safe level, likely due to a stuck water inlet valve. | Dishwasher | |
| F01 | Temperature probe fault (NTC) Info: The oven's main temperature sensor (NTC) is detected as open or short-circuited by the control board. | Oven | |
| F1 | Freezer compartment sensor fault Info: The temperature sensor (thermistor) inside the freezer section is faulty, showing an open or short circuit. | Refrigerator | |
| F02 | Overheating detected Info: The oven has detected a temperature much higher than the set point. This could be a stuck heating element relay on the control board or a faulty temperature sensor. | Oven | |
| F2 | Fresh food compartment sensor fault Info: The temperature sensor in the refrigerator (fresh food) section is faulty. | Refrigerator | |
| F03 | Main board communication failure Info: The connection between the main control board and the display/user interface board has been lost. | Oven | |
| F3 | Defrost sensor fault Info: The defrost thermistor, which monitors the evaporator coil temperature during a defrost cycle, has failed. | Refrigerator | |
| F04 | EEPROM data error Info: The memory chip (EEPROM) on the main control board is corrupted or has failed. | Oven | |
| F4 | Defrost heater failure Info: The defrost heating element is open circuit and not working. This will lead to a build-up of ice on the evaporator coil. 5 Elite Techs Verified | Refrigerator | |
| F5 | Ice maker fault Info: A fault has been detected with the ice maker mechanism or its sensor. | Refrigerator | |
| F6 | NTC temperature sensor error Info: The main control board has detected an open or short circuit in the NTC temperature sensor. | Dishwasher |