AEG E53 — Dryer
[ACTIVE]AEG Lavatherm / SensiDry / AbsoluteCare Heat-Pump: Motor triac sensing circuit fault E53; microprocessor detects inconsistent voltage across triac output terminals.
On AEG (AEG Lavatherm / SensiDry / AbsoluteCare Heat-Pump) models: Degraded SMD feedback resistors on control board, cracked solder joints around motor relay/triac section, or power surge damage.
Remove main control board and inspect PCB under magnification for burned SMD resistors or broken solder joints near motor terminals. Rotate selector to 12 o'clock (OFF), press and hold Start/Pause and Exit simultaneously for 4 seconds until the diagnostic LED sequence resets error memory.



