AEG E62 — Dryer
[ACTIVE]AEG Lavatherm / SensiDry / AbsoluteCare Heat-Pump: Overheating alarm E62; drum temperature exceeds maximum safety limit (> 95°C) and cycle halts immediately.
On AEG (AEG Lavatherm / SensiDry / AbsoluteCare Heat-Pump) models: Stuck closed heating relay contact on PCB (continuous power to heater), blocked lint filter stopping heat dissipation, or defective forward duct NTC sensor.
Inspect heating relay on control board (ensure contacts open when unpowered, resistance ∞ Ω). Clean all lint filters and measure front duct NTC resistance (~5–6 kΩ at 25°C). Rotate selector to 12 o'clock (OFF), press and hold Start/Pause and Exit simultaneously for 4 seconds until the diagnostic LED sequence resets error memory.



