AEG E93 — Dryer
[ACTIVE]AEG Lavatherm / SensiDry / AbsoluteCare Heat-Pump: Configuration checksum error E93; appliance configuration code stored in EEPROM memory is corrupted or unprogrammed.
On AEG (AEG Lavatherm / SensiDry / AbsoluteCare Heat-Pump) models: Power blackout during drying cycle causing partial EEPROM write, memory cell degradation, unconfigured universal replacement PCB.
Enter diagnostic service mode. Re-enter 16-digit alphanumeric configuration code printed on appliance serial sticker or service documentation. Rotate selector to 12 o'clock (OFF), press and hold Start/Pause and Exit simultaneously for 4 seconds until the diagnostic LED sequence resets error memory.



