Amana Refrigerator / Freezer 8E

Amana error code 8E indicates: Amana Temp Assure Side-by-Side & Bottom-Mount Refrigerator: Diagnostic code 8E indicates ice maker mold temperature thermistor circuit error; automatic ice harvest cycle suspended..

The primary root cause for Amana code 8E is: On Amana refrigerators (Amana Temp Assure and Jazz electronic control platform): Water seepage into mold thermistor cavity, cracked wire pigtail, or open NTC element (nominal 2.7 kΩ at 25°C, 14.5 kΩ at -10°C)..

To resolve error code 8E: Disconnect power. Remove ice maker assembly. Measure mold thermistor resistance across pins (14.5 kΩ at -10°C). If open circuit, replace ice maker module. Press and hold Refrigerator Temp and Freezer Temp adjustment buttons simultaneously for 3 seconds to reset Jazz board.

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Amana code 8E persists, the physical component causing On Amana refrigerators (Amana Temp Assure and Jazz electronic control platform): Water seepage into mold thermistor cavity, cracked wire pigtail, or open NTC element (nominal 2.7 kΩ at 25°C, 14.5 kΩ at -10°C). must be inspected or replaced.

Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.