Field Actions
DISPATCHAlways disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.
Frequently Asked Questions: Ariston F1
FAQ TREEWhat does error code F1 mean on a Ariston appliance?
Ariston error code F1 indicates: Ariston F1: NTC temperature sensor signal out of range (open or short circuit) in Refrigerator / Freezer..
What is the root cause of Ariston error code F1?
The primary root cause for Ariston code F1 is: The refrigerator compartment's temperature sensor (thermistor) is open or short-circuited..
How do I fix or resolve Ariston error code F1?
To resolve error code F1: Test the resistance of the fridge thermistor and check its wiring. Replace if faulty.
Is it safe to clear Ariston error code F1 by resetting power?
Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Ariston code F1 persists, the physical component causing The refrigerator compartment's temperature sensor (thermistor) is open or short-circuited. must be inspected or replaced.
How do I test electrical resistance for Ariston code F1 using a multimeter?
Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..
What safety protocol must be followed before servicing Ariston code F1?
Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.
Community Verification
COMMUNITYDid this solution resolve the issue?



