Bosch E18 — Dishwasher
[ACTIVE]Bosch Serie 4 / Serie 6 / Serie 8 ActiveWater & PerfectDry Zeolith: Low water flow inlet timeout E18; minimum water volume not achieved within programmed filling time window.
On Bosch dishwashers: Water supply tap barely open, clogged wire mesh filter inside AquaStop union nut, kinked inlet hose, or faulty flowmeter.
Verify bucket test at tap (must deliver > 10 L/min). Clean inlet mesh filter. Straighten inlet hose. Check flowmeter impulse output. Hold Start/Reset key for 3 seconds until '0:01' appears, close door, allow 60s for drain completion, then power off.



