Field Actions
DISPATCHAlways disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.
Frequently Asked Questions: Candy L
FAQ TREEWhat does error code L mean on a Candy appliance?
Candy error code L indicates: Candy Induction Hob touch panel shows 'L' on all zone displays and control keys do not respond to touch..
What is the root cause of Candy error code L?
The primary root cause for Candy code L is: Child lock safety mode is active on the Candy touch control module, locking power level keys against unintended changes..
How do I fix or resolve Candy error code L?
To resolve error code L: Press and hold the dedicated Key Lock sensor (key symbol) for 3 seconds until an audible acoustic beep sounds and the 'L' indicator clears, restoring zone power sliders.
Is it safe to clear Candy error code L by resetting power?
Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Candy code L persists, the physical component causing Child lock safety mode is active on the Candy touch control module, locking power level keys against unintended changes. must be inspected or replaced.
How do I test electrical resistance for Candy code L using a multimeter?
Set a digital multimeter to ohms (Ω). Disconnect power and test PTC Heater Pellet / Pulse Solenoid / Microswitch Contacts across Across PTC heater terminals on lock bezel; switch contact reads <0.2Ω when locked. Expected nominal reading is 800Ω–1.5kΩ (PTC terminals L-N) / 60Ω–120Ω (Pulse Solenoid). Tolerance: ±15%. Switch contacts must read open (OL) when unlocked and 0.0Ω–0.2Ω when fully latched..
What safety protocol must be followed before servicing Candy code L?
Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.
Community Verification
COMMUNITYDid this solution resolve the issue?



