Ignis FDL

Ignis error code FDL indicates: Ignis LTE Top-Loader & TuttoinUno Front-Loader Washing Machine: Door lock latching failure FDL; door lock mechanism fails to mechanically secure drum hatch before cycle startup..

The primary root cause for Ignis code FDL is: On Ignis washing appliances: Misaligned door catch, foreign object in lock aperture, burnt door lock solenoid, or broken locking pawl slider..

To resolve error code FDL: Press firmly on door latch zone. Clear debris from strike hole. Measure lock solenoid resistance (800–1100 Ω). Replace motorized door lock if open circuit. Hold Start/Cancel button for 5 seconds until indicator light turns solid, switch off, and turn knob to 0.

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Ignis code FDL persists, the physical component causing On Ignis washing appliances: Misaligned door catch, foreign object in lock aperture, burnt door lock solenoid, or broken locking pawl slider. must be inspected or replaced.

Set a digital multimeter to ohms (Ω). Disconnect power and test 3-Phase Motor Windings / Tacho Generator / Carbon Brushes across Across phase pins U-V, V-W, U-W on motor harness; across tacho pins. Expected nominal reading is 3Ω–6Ω (BLDC phase U-V-W) / 60Ω–180Ω (Tacho coil) / 1.5Ω–3.5Ω (Universal stator). Tolerance: BLDC phase winding values must be strictly balanced within ±0.3Ω. Hand rotation generates 1V–4V AC on tacho..

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.