Indesit F6 — Dishwasher
[ACTIVE]Indesit Push&Go & Extra Hygiene DFP Series Dishwasher: Water inlet tap closed error F6; insufficient water fills sump during filling sequence, flow rate below 1.5 L/min.
On Indesit dishwashers: Supply stopcock closed, kinked inlet hose with integrated AquaStop valve, blocked sand filter, or line pressure below 0.5 bar.
Verify dynamic supply pressure at tap. Clean mesh filter in AquaStop connection nut. Measure inlet valve solenoid coil resistance (3.5–4.5 kΩ). Press and hold Start/Reset for 5 seconds until drain pump runs, wait 60 seconds, then power cycle ON/OFF.



