OEM VERIFIED BENCH

OFFICIAL FAULT CODEF01

LG // OFFICIAL DIAGNOSTIC BENCH

LG F01

Washing MachineDrive Motor, Inverter & Tachometer Sensor

Washing Machine

Select Appliance Type

0ms Instant Telemetry Switch

Other Brands Sharing Code F01:SamsungF01 WhirlpoolF-01 BekoF01 IndesitF01 BauknechtF01 V-ZugF01 AristonF01 BrandtF01 De DietrichF01 HisenseF01

Symptom / Description

FAULT

LG AI DD / TurboWash 360 / Centum System Direct Drive Washer: Motor phase imbalance fault F01; 3-phase BLDC motor inverter detects missing phase or unequal current consumption across UVW.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

On LG washing machines featuring AI DD artificial intelligence direct drive, 6 Motion DD kinematics, and TurboWash 360 multi-nozzle injection: Open stator winding on motor phase U, V, or W, broken connector pin, or blown IGBT output driver channel.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

1Disconnect motor plug. Measure winding resistance across pairs U-V, V-W, and U-W with multimeter (all must read identical value ±0.2 Ω, ~5.5–11.5 Ω). Press Power to turn off. Unplug from mains for 5 seconds. Hold Start/Pause for 5 seconds with unit unplugged to discharge capacitors, then plug in.

AI diagnostic workshop engine analyzing appliance circuit schematics and error telemetry in real time

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide LG Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLDrive Motor, Inverter & Tachometer SensorWashing Machine

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

Precision digital multimeter probes measuring electrical resistance in Ohms on an appliance control board

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

3Ω–6Ω (BLDC phase U-V-W) / 60Ω–180Ω (Tacho coil) / 1.5Ω–3.5Ω (Universal stator)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:3-Phase Motor Windings / Tacho Generator / Carbon Brushes

Test Pins & Connections

PROBE (+)

PROBE (-)

Across phase pins U-V, V-W, U-W on motor harness; across tacho pins

Tolerance & Diagnostic CriteriaBLDC phase winding values must be strictly balanced within ±0.3Ω. Hand rotation generates 1V–4V AC on tacho.

1. Pre-Intervention Electrical Safety Protocols

!High-Voltage Safety Protocol & DC Bus: Wait at least 5 minutes after power cutoff to allow inverter DC bus capacitors (380V DC) to bleed down.
!Verify 0V DC across inverter filter capacitors before unplugging motor harness connectors.
!Keep hands clear of drive belt and pulleys during any manual rotation tng.

3. Preliminary Mechanical & Visual Checks

Slip off drive belt and spin drum/motor shaft by hand to check for roaring or seized ball bearings.
For universal motors: verify carbon brushes have at least 10mm remaining length and smooth contact faces.
Inspect motor suspension rubber mounts and drive belt tension/groove profile.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: LG F01

FAQ TREE

What does error code F01 mean on a LG appliance?

LG error code F01 indicates: LG AI DD / TurboWash 360 / Centum System Direct Drive Washer: Motor phase imbalance fault F01; 3-phase BLDC motor inverter detects missing phase or unequal current consumption across UVW..

What is the root cause of LG error code F01?

The primary root cause for LG code F01 is: On LG washing machines featuring AI DD artificial intelligence direct drive, 6 Motion DD kinematics, and TurboWash 360 multi-nozzle injection: Open stator winding on motor phase U, V, or W, broken connector pin, or blown IGBT output driver channel..

How do I fix or resolve LG error code F01?

To resolve error code F01: Disconnect motor plug. Measure winding resistance across pairs U-V, V-W, and U-W with multimeter (all must read identical value ±0.2 Ω, ~5.5–11.5 Ω). Press Power to turn off. Unplug from mains for 5 seconds. Hold Start/Pause for 5 seconds with unit unplugged to discharge capacitors, then plug in.

Is it safe to clear LG error code F01 by resetting power?

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if LG code F01 persists, the physical component causing On LG washing machines featuring AI DD artificial intelligence direct drive, 6 Motion DD kinematics, and TurboWash 360 multi-nozzle injection: Open stator winding on motor phase U, V, or W, broken connector pin, or blown IGBT output driver channel. must be inspected or replaced.

How do I test electrical resistance for LG code F01 using a multimeter?

Set a digital multimeter to ohms (Ω). Disconnect power and test 3-Phase Motor Windings / Tacho Generator / Carbon Brushes across Across phase pins U-V, V-W, U-W on motor harness; across tacho pins. Expected nominal reading is 3Ω–6Ω (BLDC phase U-V-W) / 60Ω–180Ω (Tacho coil) / 1.5Ω–3.5Ω (Universal stator). Tolerance: BLDC phase winding values must be strictly balanced within ±0.3Ω. Hand rotation generates 1V–4V AC on tacho..

What safety protocol must be followed before servicing LG code F01?

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.

Community Verification

COMMUNITY

Did this solution resolve the issue?

Back to Search

OEM VERIFIED BENCH

OFFICIAL FAULT CODEF01

LG // OFFICIAL DIAGNOSTIC BENCH

LG F01

Washing MachineDrive Motor, Inverter & Tachometer Sensor

Washing Machine

Select Appliance Type

0ms Instant Telemetry Switch

Other Brands Sharing Code F01:SamsungF01 WhirlpoolF-01 BekoF01 IndesitF01 BauknechtF01 V-ZugF01 AristonF01 BrandtF01 De DietrichF01 HisenseF01

Symptom / Description

FAULT

LG AI DD / TurboWash 360 / Centum System Direct Drive Washer: Motor phase imbalance fault F01; 3-phase BLDC motor inverter detects missing phase or unequal current consumption across UVW.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide LG Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLDrive Motor, Inverter & Tachometer SensorWashing Machine

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

3Ω–6Ω (BLDC phase U-V-W) / 60Ω–180Ω (Tacho coil) / 1.5Ω–3.5Ω (Universal stator)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:3-Phase Motor Windings / Tacho Generator / Carbon Brushes

Test Pins & Connections

PROBE (+)

PROBE (-)

Across phase pins U-V, V-W, U-W on motor harness; across tacho pins

Tolerance & Diagnostic CriteriaBLDC phase winding values must be strictly balanced within ±0.3Ω. Hand rotation generates 1V–4V AC on tacho.

1. Pre-Intervention Electrical Safety Protocols

!High-Voltage Safety Protocol & DC Bus: Wait at least 5 minutes after power cutoff to allow inverter DC bus capacitors (380V DC) to bleed down.
!Verify 0V DC across inverter filter capacitors before unplugging motor harness connectors.
!Keep hands clear of drive belt and pulleys during any manual rotation tng.

3. Preliminary Mechanical & Visual Checks

Slip off drive belt and spin drum/motor shaft by hand to check for roaring or seized ball bearings.
For universal motors: verify carbon brushes have at least 10mm remaining length and smooth contact faces.
Inspect motor suspension rubber mounts and drive belt tension/groove profile.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: LG F01

FAQ TREE

What does error code F01 mean on a LG appliance?

What is the root cause of LG error code F01?

How do I fix or resolve LG error code F01?

Is it safe to clear LG error code F01 by resetting power?

How do I test electrical resistance for LG code F01 using a multimeter?

What safety protocol must be followed before servicing LG code F01?

Community Verification

COMMUNITY

Did this solution resolve the issue?

LG F01

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Workshop Verification & Safety Checklist

Frequently Asked Questions: LG F01

Community Verification

Related LG Washing Machine Error Codes

LG F01

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Workshop Verification & Safety Checklist

Frequently Asked Questions: LG F01

Community Verification

Related LG Washing Machine Error Codes