Miele F1058

Miele error code F1058 indicates: The drying program does not work correctly, the laundry remains damp or, conversely, is overheated at the end of the cycle..

The primary root cause for Miele code F1058 is: The main drying air temperature sensor is faulty, disconnected, or providing erroneous data to the control board..

To resolve error code F1058: Turn off the appliance from the electrical circuit. Locate the main temperature sensor in the drying air duct. Meticulously inspect its electrical connections. If no connection problem is apparent, test the sensor and replace it if out of tolerance.

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Miele code F1058 persists, the physical component causing The main drying air temperature sensor is faulty, disconnected, or providing erroneous data to the control board. must be inspected or replaced.

Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.