OEM VERIFIED BENCH

OFFICIAL FAULT CODEF4002

Miele // OFFICIAL DIAGNOSTIC BENCH

Miele Dishwasher F4002

Q: What does error code F4002 mean on a Miele appliance?

Miele error code F4002 indicates: The appliance door remains locked after the end of a cycle, sometimes with a drum movement message..

Q: What is the root cause of Miele error code F4002?

The primary root cause for Miele code F4002 is: The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically..

Q: How do I fix or resolve Miele error code F4002?

To resolve error code F4002: 1. Wait several minutes for the system to stabilize. 2. Unplug the device for 5 minutes to reset the electronics. 3. If the door remains locked, use the manual emergency unlock (see manual). 4. If the problem recurs, the rotation sensor or door lock may be defective.

Q: Is it safe to clear Miele error code F4002 by resetting power?

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Miele code F4002 persists, the physical component causing The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically. must be inspected or replaced.

Q: How do I test electrical resistance for Miele code F4002 using a multimeter?

Set a digital multimeter to ohms (Ω). Disconnect power and test PTC Heater Pellet / Pulse Solenoid / Microswitch Contacts across Across PTC heater terminals on lock bezel; switch contact reads <0.2Ω when locked. Expected nominal reading is 800Ω–1.5kΩ (PTC terminals L-N) / 60Ω–120Ω (Pulse Solenoid). Tolerance: ±15%. Switch contacts must read open (OL) when unlocked and 0.0Ω–0.2Ω when fully latched..

Q: What safety protocol must be followed before servicing Miele code F4002?

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.

Q: What does Miele error code F4002 mean on a Dishwasher?

Miele error code F4002 on a Dishwasher indicates: The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.. Primary cause: The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.. Recommended solution: 1. Wait several minutes for the system to stabilize. 2. Unplug the device for 5 minutes to reset the electronics. 3. If the door remains locked, use the manual emergency unlock (see manual). 4. If the problem recurs, the rotation sensor or door lock may be defective..

Q: What does Miele error code F4002 mean on a Tumble Dryer?

Miele error code F4002 on a Tumble Dryer indicates: The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.. Primary cause: The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.. Recommended solution: 1. Wait several minutes for the system to stabilize. 2. Unplug the device for 5 minutes to reset the electronics. 3. If the door remains locked, use the manual emergency unlock (see manual). 4. If the problem recurs, the rotation sensor or door lock may be defective..

DishwasherDoor Lock Mechanism & Safety Interlock

Dishwasher

Select Appliance Type

0ms Instant Telemetry Switch

Symptom / Description

FAULT

The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

1Wait several minutes for the system to stabilize. 2. Unplug the device for 5 minutes to reset the electronics. 3. If the door remains locked, use the manual emergency unlock (see manual). 4. If the problem recurs, the rotation sensor or door lock may be defective.

AI diagnostic workshop engine analyzing appliance circuit schematics and error telemetry in real time

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide Miele Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

SWISS ATELIER TECHNICAL BLUEPRINT // 2026 SCHEMATIC STANDARD

Door Interlock & Triac Loop

PTC Bi-metal Solenoid L1, Microswitch S1 & PCB Switching Triac TY1

CALIBRATED TEST POINTS (TP1 / TP2)

ACTIVE MULTIMETER BENCH

Target Component

PTC Heater Pellet / Pulse Solenoid / Microswitch Contacts

Nominal Resistance / Test Range

800Ω–1.5kΩ (PTC terminals L-N) / 60Ω–120Ω (Pulse Solenoid)

Test Harness Pins

Across PTC heater terminals on lock bezel; switch contact reads <0.2Ω when locked

Diagnostic Verification Rule

High resistance (> 2 kΩ) or failed contact closure prevents cycle initiation and locks MCU bus.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLDoor Lock Mechanism & Safety InterlockDishwasher

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

Precision digital multimeter probes measuring electrical resistance in Ohms on an appliance control board

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

800Ω–1.5kΩ (PTC terminals L-N) / 60Ω–120Ω (Pulse Solenoid)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:PTC Heater Pellet / Pulse Solenoid / Microswitch Contacts

Test Pins & Connections

PROBE (+)

PROBE (-)

Across PTC heater terminals on lock bezel; switch contact reads <0.2Ω when locked

Tolerance & Diagnostic Criteria±15%. Switch contacts must read open (OL) when unlocked and 0.0Ω–0.2Ω when fully latched.

1. Pre-Intervention Electrical Safety Protocols

!Electrical Safety Protocol: Disconnect 230V mains power before releasing door gasket clamp or lock retaining screws.
!Never short-circuit or bypass the safety door lock contacts: severe hazard of rotating drum exposure or fire.
!Keep fingers away from spring-loaded latch mechanisms during closure cycling.

3. Preliminary Mechanical & Visual Checks

Inspect door strike pin and handle latch hook for plastic deformation, breakage, or misalignment.
Check door hinge alignment: a sagging door prevents the latch tongue from engaging the safety microswitch.
Locate and verify emergency manual pull cord inside the lower drain pump hatch.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: Miele F4002

FAQ TREE

What does error code F4002 mean on a Miele appliance?

Miele error code F4002 indicates: The appliance door remains locked after the end of a cycle, sometimes with a drum movement message..

What is the root cause of Miele error code F4002?

The primary root cause for Miele code F4002 is: The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically..

How do I fix or resolve Miele error code F4002?

To resolve error code F4002: 1. Wait several minutes for the system to stabilize. 2. Unplug the device for 5 minutes to reset the electronics. 3. If the door remains locked, use the manual emergency unlock (see manual). 4. If the problem recurs, the rotation sensor or door lock may be defective.

Is it safe to clear Miele error code F4002 by resetting power?

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Miele code F4002 persists, the physical component causing The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically. must be inspected or replaced.

How do I test electrical resistance for Miele code F4002 using a multimeter?

Set a digital multimeter to ohms (Ω). Disconnect power and test PTC Heater Pellet / Pulse Solenoid / Microswitch Contacts across Across PTC heater terminals on lock bezel; switch contact reads <0.2Ω when locked. Expected nominal reading is 800Ω–1.5kΩ (PTC terminals L-N) / 60Ω–120Ω (Pulse Solenoid). Tolerance: ±15%. Switch contacts must read open (OL) when unlocked and 0.0Ω–0.2Ω when fully latched..

What safety protocol must be followed before servicing Miele code F4002?

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.

What does Miele error code F4002 mean on a Dishwasher?

Miele error code F4002 on a Dishwasher indicates: The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.. Primary cause: The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.. Recommended solution: 1. Wait several minutes for the system to stabilize. 2. Unplug the device for 5 minutes to reset the electronics. 3. If the door remains locked, use the manual emergency unlock (see manual). 4. If the problem recurs, the rotation sensor or door lock may be defective..

What does Miele error code F4002 mean on a Tumble Dryer?

Miele error code F4002 on a Tumble Dryer indicates: The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.. Primary cause: The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.. Recommended solution: 1. Wait several minutes for the system to stabilize. 2. Unplug the device for 5 minutes to reset the electronics. 3. If the door remains locked, use the manual emergency unlock (see manual). 4. If the problem recurs, the rotation sensor or door lock may be defective..

Community Verification

COMMUNITY

Did this solution resolve the issue?

Miele F4002 — Multi-Appliance Technical Reference

Verified OEM diagnostic specifications across all appliance systems sharing this fault code.

Miele F4002 — Dishwasher

[ACTIVE]

Symptom / Description:

The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.

Root Cause:

The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.

Repair Instructions:

1. Wait several minutes for the system to stabilize. 2. Unplug the device for 5 minutes to reset the electronics. 3. If the door remains locked, use the manual emergency unlock (see manual). 4. If the problem recurs, the rotation sensor or door lock may be defective.

Miele F4002 — Dryer

Symptom / Description:

The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.

Root Cause:

The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.

Repair Instructions:

Back to Search

OEM VERIFIED BENCH

OFFICIAL FAULT CODEF4002

Miele // OFFICIAL DIAGNOSTIC BENCH

Miele Dishwasher F4002

DishwasherDoor Lock Mechanism & Safety Interlock

Dishwasher

Select Appliance Type

0ms Instant Telemetry Switch

Symptom / Description

FAULT

The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide Miele Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

SWISS ATELIER TECHNICAL BLUEPRINT // 2026 SCHEMATIC STANDARD

Door Interlock & Triac Loop

PTC Bi-metal Solenoid L1, Microswitch S1 & PCB Switching Triac TY1

CALIBRATED TEST POINTS (TP1 / TP2)

ACTIVE MULTIMETER BENCH

Target Component

PTC Heater Pellet / Pulse Solenoid / Microswitch Contacts

Nominal Resistance / Test Range

800Ω–1.5kΩ (PTC terminals L-N) / 60Ω–120Ω (Pulse Solenoid)

Test Harness Pins

Across PTC heater terminals on lock bezel; switch contact reads <0.2Ω when locked

Diagnostic Verification Rule

High resistance (> 2 kΩ) or failed contact closure prevents cycle initiation and locks MCU bus.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLDoor Lock Mechanism & Safety InterlockDishwasher

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

800Ω–1.5kΩ (PTC terminals L-N) / 60Ω–120Ω (Pulse Solenoid)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:PTC Heater Pellet / Pulse Solenoid / Microswitch Contacts

Test Pins & Connections

PROBE (+)

PROBE (-)

Across PTC heater terminals on lock bezel; switch contact reads <0.2Ω when locked

Tolerance & Diagnostic Criteria±15%. Switch contacts must read open (OL) when unlocked and 0.0Ω–0.2Ω when fully latched.

1. Pre-Intervention Electrical Safety Protocols

!Electrical Safety Protocol: Disconnect 230V mains power before releasing door gasket clamp or lock retaining screws.
!Never short-circuit or bypass the safety door lock contacts: severe hazard of rotating drum exposure or fire.
!Keep fingers away from spring-loaded latch mechanisms during closure cycling.

3. Preliminary Mechanical & Visual Checks

Inspect door strike pin and handle latch hook for plastic deformation, breakage, or misalignment.
Check door hinge alignment: a sagging door prevents the latch tongue from engaging the safety microswitch.
Locate and verify emergency manual pull cord inside the lower drain pump hatch.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: Miele F4002

FAQ TREE

What does error code F4002 mean on a Miele appliance?

Miele error code F4002 indicates: The appliance door remains locked after the end of a cycle, sometimes with a drum movement message..

What is the root cause of Miele error code F4002?

The primary root cause for Miele code F4002 is: The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically..

How do I fix or resolve Miele error code F4002?

Is it safe to clear Miele error code F4002 by resetting power?

How do I test electrical resistance for Miele code F4002 using a multimeter?

What safety protocol must be followed before servicing Miele code F4002?

What does Miele error code F4002 mean on a Dishwasher?

What does Miele error code F4002 mean on a Tumble Dryer?

Community Verification

COMMUNITY

Did this solution resolve the issue?

Miele F4002 — Multi-Appliance Technical Reference

Verified OEM diagnostic specifications across all appliance systems sharing this fault code.

Miele F4002 — Dishwasher

[ACTIVE]

Symptom / Description:

The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.

Root Cause:

The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.

Repair Instructions:

Miele F4002 — Dryer

Symptom / Description:

The appliance door remains locked after the end of a cycle, sometimes with a drum movement message.

Root Cause:

The rotation sensor detects a false movement of the drum, or the door locking system is blocked mechanically or electronically.

Repair Instructions:

Miele Dishwasher F4002

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Door Interlock & Triac Loop

Workshop Verification & Safety Checklist

Frequently Asked Questions: Miele F4002

Community Verification

Miele F4002 — Multi-Appliance Technical Reference

Miele F4002 — Dishwasher

Miele F4002 — Dryer

Related Miele Dishwasher Error Codes

Miele Dishwasher F4002

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Door Interlock & Triac Loop

Workshop Verification & Safety Checklist

Frequently Asked Questions: Miele F4002

Community Verification

Miele F4002 — Multi-Appliance Technical Reference

Miele F4002 — Dishwasher

Miele F4002 — Dryer

Related Miele Dishwasher Error Codes