Miele F6041

Miele error code F6041 indicates: The cooktop suddenly stops, often after operating at high power, and displays the error code..

The primary root cause for Miele code F6041 is: The main power module (Module 0) heat sink temperature probe detects overheating, or the probe itself is faulty..

To resolve error code F6041: 1. Turn off the power and make sure the ventilation slots under the plate are clear and clean to allow good air circulation. 2. Check that the cooling fan is working (a fan sound should be audible). 3. If the ventilation is correct and the error persists even when cold, the temperature sensor or the complete power module must be replaced.

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Miele code F6041 persists, the physical component causing The main power module (Module 0) heat sink temperature probe detects overheating, or the probe itself is faulty. must be inspected or replaced.

Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.