Field Actions
DISPATCHAlways disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.
Frequently Asked Questions: Samsung 25 E
FAQ TREEWhat does error code 25 E mean on a Samsung appliance?
Samsung error code 25 E indicates: Refrigerator defrost system error.. Diagnostic error code 25 E reported on Samsung Refrigerator..
What is the root cause of Samsung error code 25 E?
The primary root cause for Samsung code 25 E is: On Samsung Refrigerator: Indicates an issue with the fresh food compartment's defrost system..
How do I fix or resolve Samsung error code 25 E?
To resolve error code 25 E: On Samsung Refrigerator: Service is required to test the components of the refrigerator defrost system.
Is it safe to clear Samsung error code 25 E by resetting power?
Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Samsung code 25 E persists, the physical component causing On Samsung Refrigerator: Indicates an issue with the fresh food compartment's defrost system. must be inspected or replaced.
How do I test electrical resistance for Samsung code 25 E using a multimeter?
Set a digital multimeter to ohms (Ω). Disconnect power and test Compressor Motor Windings (Run/Start) & Defrost Heater across Across 3 compressor pins (Common, Run, Start): R(C-S) + R(C-R) = R(S-R). Winding to earth: >20MΩ (OL).. Expected nominal reading is 15Ω–25Ω (Run C-R), 20Ω–35Ω (Start C-S), 200Ω–400Ω (Defrost Heater). PTC Relay: 10Ω–30Ω at 25°C.. Tolerance: ±10%. Any low insulation resistance to casing (<2MΩ) trips the breaker. Defrost bimetal reads <0.5Ω when sub-zero..
What safety protocol must be followed before servicing Samsung code 25 E?
Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.
Community Verification
COMMUNITYDid this solution resolve the issue?



