Field Actions
DISPATCHAlways disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.
Frequently Asked Questions: Samsung LC1
FAQ TREEWhat does error code LC1 mean on a Samsung appliance?
Samsung error code LC1 indicates: Samsung LC1: Water drainage failure detected in Washing Machine; drain pump cannot evacuate water within safety time limit..
What is the root cause of Samsung error code LC1?
The primary root cause for Samsung code LC1 is: On Samsung Washing Machine: A leak has been detected in the base of the machine. Loose hose connection or internal leak..
How do I fix or resolve Samsung error code LC1?
To resolve error code LC1: On Samsung Washing Machine: Disconnect from power and water supply immediately. Check drain hose and water inlet connections. May require service.
Is it safe to clear Samsung error code LC1 by resetting power?
Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Samsung code LC1 persists, the physical component causing On Samsung Washing Machine: A leak has been detected in the base of the machine. Loose hose connection or internal leak. must be inspected or replaced.
How do I test electrical resistance for Samsung code LC1 using a multimeter?
Set a digital multimeter to ohms (Ω). Disconnect power and test Drain Pump Motor Stator Coils across Across pump motor spade terminals (L-N unclipped). Expected nominal reading is 160Ω–220Ω (Sync 230V) / 20Ω–45Ω (3-Phase BLDC). Tolerance: ±10% balance. Insulation resistance between coil and motor chassis must exceed 20MΩ..
What safety protocol must be followed before servicing Samsung code LC1?
Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.
Community Verification
COMMUNITYDid this solution resolve the issue?



