Siemens E09 — Dishwasher
[ACTIVE]Siemens iQ300 / iQ500 / iQ700 / iQ800 studioLine Zeolith & varioSpeed Plus: Heating circuit open failure E09; heat pump heating element open circuit, water remains cold throughout cycle.
On Siemens dishwashers: Burnt thick-film heating element on heat pump casing, thermal fuse open, or loose wiring harness plug on heater terminals.
Disconnect mains. Measure resistance across heat pump terminals L and N (nominal 19–22 Ω; open circuit if > 1 kΩ). Replace complete heat pump assembly. Press and hold Start button for 4 seconds until display indicates '0:01', wait for evacuation pump, then power off.



