Zerowatt E11 — Dryer
[ACTIVE]Zerowatt ZTD Condenser & Heat-Pump Tumble Dryer: Exhaust air temperature overheat E11; air temperature leaving the drum exceeds 80°C triggering thermal protection.
On Zerowatt tumble dryers utilizing ZTD condensation airflow duct system, bi-metal safety thermal cut-out, and electromechanical program timer: Heavily choked condenser unit, clogged exhaust ductwork, or blocked rear air intake grille behind machine.
Allow appliance to cool for 30 minutes. Remove and wash heat exchanger condenser. Test safety thermostat continuity with a multimeter. Ensure machine has minimum 10 cm rear clearance from wall. Rotate dial to Off, press Start and Low Heat buttons for 5 seconds until the buzzer chirps twice, then release and turn to Off.



