Zerowatt E21 — Dryer
[ACTIVE]Zerowatt ZTD Condenser & Heat-Pump Tumble Dryer: Moisture sensing calibration amplifier fault E21; analog-to-digital converter receives out-of-scale conductance baseline.
On Zerowatt tumble dryers utilizing ZTD condensation airflow duct system, bi-metal safety thermal cut-out, and electromechanical program timer: Wet conductive fluff bridging sensor strips to chassis, moisture inside front fascia harness, or operational amplifier IC drift.
Thoroughly vacuum lint from sensor bar mounting insulator. Check resistance between sensor strips and chassis (must be infinite >20 MΩ when dry). Rotate dial to Off, press Start and Low Heat buttons for 5 seconds until the buzzer chirps twice, then release and turn to Off.



