CodesErreur Logo
CodesErreur.comPowered by CodesErreur
Database
Tools
Diagnostic ToolsNew Parts Locator
Community
CertificationsPRO Top Techs
B2B Services
Brands Manuals Specialists Job Board Elite Forum Academy
Premium
CodesErreur Logo

CodesErreur.com

Premium appliance diagnostics & repair database.
Powered by AI to help certified technicians worldwide.

Trusted by professionals in CH & FR

Platform

Error Code SearchAI Diagnostic ChatBrand Pokedex

Professionals

Elite Tech ForumElite Job BoardPremium Memberships

Corporate

Terms of UsePrivacy Policy

SAFETY DISCLAIMER

The technical information, diagnostic guides, error codes, and AI-generated suggestions provided on this website are intended exclusively for certified and qualified professionals. Appliance repair involves severe electrical hazards, high voltages, and mechanical risks that can result in fatal injury or severe property damage. If you are not a trained technician, do not attempt to repair any appliances. CodesErreur assumes no responsibility or liability for any damage, injury, or consequential losses resulting from the use of the information provided on this platform. You use all information entirely at your own risk.

© 2026 CodesErreur. All rights reserved.

Terms of Service Privacy Policy
Back to Search

Nardi Error Codes & Diagnostics

Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Nardi home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.

18 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
CodeFault / DiagnosticsAppliancesAction
E01
Door will not lock or machine thinks the door is open.
Info: Fault with the door lock mechanism, wiring to the lock, or the main control board.
Washing Machine
E01 Full Steps Diagnose
E1
Dishwasher fails to fill with water within the expected time.
Info: Water supply issue, kinked inlet hose, or faulty water inlet valve/solenoid.
Dishwasher
E1 Full Steps Diagnose
E02
Machine is not filling with water or filling very slowly.
Info: Water supply is turned off, inlet hose is kinked or blocked, inlet valve filter is blocked, or the water inlet valve has failed.
Washing Machine
E02 Full Steps Diagnose
E2
Dishwasher is not draining the water.
Info: Clogged filters, blocked drain hose, or a faulty drain pump.
Dishwasher
E2 Full Steps Diagnose
E03
Machine fails to drain the water.
Info: Drain filter is clogged, drain pump is blocked or faulty, or the drain hose is kinked or blocked.
Washing Machine
E03 Full Steps Diagnose
E3
Water is not heating up, resulting in poor wash performance.
Info: Faulty heating element, wiring issue, or a fault on the main control board.
Dishwasher
E3 Full Steps Diagnose
E04
Machine has overfilled with water or leak detected in base.
Info: Pressure switch fault, water inlet valve stuck open, or an internal leak has activated the anti-flood switch in the base.
Washing Machine
E04 Full Steps Diagnose
E4
Dishwasher has stopped mid-cycle and may show signs of leaking.
Info: The machine has overfilled, or the anti-flood switch in the base has been activated by a leak.
Dishwasher
E4 Full Steps Diagnose
E05
Water is not heating up or cycle gets stuck.
Info: The NTC temperature sensor is faulty (open or short circuit).
Washing Machine
E05 Full Steps Diagnose
E07
Motor not turning or spinning erratically.
Info: Fault with the motor tacho (speed sensor), motor brushes are worn, or there is a motor wiring issue.
Washing Machine
E07 Full Steps Diagnose
E09
Motor is not running at all or runs at full speed uncontrollably.
Info: A short circuit in the motor's power triac on the main control board (PCB).
Washing Machine
E09 Full Steps Diagnose
E16
Machine trips the circuit breaker, or water does not heat.
Info: The heating element has failed or has a short circuit to earth.
Washing Machine
E16 Full Steps Diagnose
F1
Oven not heating correctly, displays error.
Info: Oven temperature sensor (NTC/thermistor) has failed or its connection is loose (open circuit).
Oven
F1 Full Steps Diagnose
F2
Oven overheating or not heating correctly.
Info: The oven temperature sensor (NTC/thermistor) has a short circuit.
Oven
F2 Full Steps Diagnose
F3
Oven has shut down and displays an error.
Info: Overheating detected by the safety thermostat or the main control board.
Oven
F3 Full Steps Diagnose
F4
Oven overheats, electronics may shut down after use.
Info: The cooling fan that cools the electronic components is not working.
5 Elite Techs Verified
Oven
F4 Full Steps Diagnose
F8
Oven door will not lock or unlock, especially for pyrolysis (self-cleaning) modes.
Info: The door locking mechanism is jammed or has failed electronically.
Oven
F8 Full Steps Diagnose
STOP
The word 'STOP' is flashing on the oven display and it will not operate.
Info: This can indicate a major electronic fault, a problem with the door lock, or that the oven is in 'demo' or 'showroom' mode.
Oven
STOP Full Steps Diagnose