Siltal Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Siltal home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
45 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| AL01 | Machine stops, drain pump may run continuously Info: Similar to E4, this indicates the anti-flood system has been activated due to a water leak in the base. | Dishwasher | |
| AL02 | Dishwasher does not fill with water Info: Water fill timeout. This is an alternative code for E1 on some models. | Dishwasher | |
| AL03 | Dishwasher does not drain Info: Drainage timeout. This is an alternative code for E2 on some models. | Dishwasher | |
| AL05 | No water circulation, dishes remain dirty Info: The main wash pump (circulation motor) is faulty, its capacitor has failed, or it is blocked. | Dishwasher | |
| AL06 | Machine overfills with water Info: Fault with the water inlet valve (solenoid), causing it to stick open. Can also be a pressure switch fault. | Dishwasher | |
| E01 | Machine won't start, door light flashing Info: The door lock mechanism is faulty, the wiring to the lock is damaged, or the main control board is not detecting the lock. | Washing Machine | |
| E1 | Dishwasher stops mid-cycle, beeping Info: Water fill timeout. The machine has not filled with the required amount of water within the set time. | Dishwasher | |
| E02 | Machine not filling with water Info: Water supply is turned off, inlet hose is kinked or blocked, inlet valve filter is blocked, or the water inlet valve itself has failed. | Washing Machine | |
| E2 | Dishwasher cycle finishes with dirty water inside Info: Drain timeout. The machine has failed to drain the water within the set time. | Dishwasher | |
| E03 | Machine not draining water, cycle stops with water inside Info: The drain filter is clogged, the drain pump is blocked or faulty, or the drain hose is kinked or blocked. | Washing Machine | |
| E3 | Dishes are not being cleaned with hot water, cycle is cold Info: Heating element failure or a fault in the heating circuit (relay, wiring, or thermostat). | Dishwasher | |
| E04 | Machine overfills or anti-flood system activated Info: The pressure switch is faulty or the tube connected to it is blocked or dislodged. Can also be caused by excessive foaming from too much detergent. | Washing Machine | |
| E4 | Dishwasher has stopped and is continuously trying to drain Info: A leak has been detected in the base of the machine, activating the anti-flood float switch. | Dishwasher | |
| E05 | Water not heating or cycle takes too long Info: The NTC temperature sensor is faulty (open or short circuit), or there is a wiring issue between the sensor and the control board. | Washing Machine | |
| E5 | Cycle is not heating correctly or stops before heating phase Info: The NTC temperature sensor is faulty, providing incorrect readings to the control board. 5 Elite Techs Verified | Dishwasher | |
| E06 | Machine is dead or behaving erratically Info: A fault has been detected on the main control board (PCB), often a memory (EEPROM) corruption or component failure. | Washing Machine | |
| E6 | Water does not heat up Info: Open circuit detected on the temperature sensor (NTC). The sensor has failed or its wiring is broken. | Dishwasher | |
| E07 | Motor not turning or turning erratically Info: The motor is jammed, the motor's tacho sensor is faulty, or the door lock has failed mid-cycle, preventing the motor from engaging. | Washing Machine | |
| E7 | Water overheats or cycle stops unexpectedly Info: Short circuit detected on the temperature sensor (NTC). | Dishwasher | |
| E08 | Motor spins too fast or not at all, drum 'jerks' Info: The motor's tacho sensor (speed sensor) is providing no or an incorrect signal to the control board. | Washing Machine | |
| E09 | Motor does not run, often after a loud noise Info: The motor's power controller (triac) on the main control board has short-circuited. | Washing Machine | |
| E10 | Program selection issue or drum position sensor fault Info: Fault with the program selector switch or, on some models, a drum position sensor fault. | Washing Machine | |
| E11 | Dryer not working, clothes remain wet Info: Open circuit fault with the dryer's temperature sensor (NTC). Applicable to washer-dryers only. | Washer Dryer | |
| E12 | Appliance unresponsive, lights flashing Info: Communication error between the main control board (PCB) and the display board. | Washer Dryer | |
| E13 | Dryer heating issue Info: Fault with the NTC sensor on the dryer's heating element side. Applicable to washer-dryers only. | Washer Dryer | |
| E14 | No heat during drying cycle Info: Fault with the dryer's heating element or its control circuit on the PCB. Applicable to washer-dryers only. | Washer Dryer | |
| E15 | Machine cannot be programmed, behaves erratically Info: The program memory on the main control board (EEPROM) has become corrupted or has failed. | Washing Machine | |
| E16 | Trips house electrical breaker (RCD/GFCI) Info: The heating element has developed an insulation failure, causing a short circuit to earth. | Washing Machine | |
| E17 | Motor speed is incorrect or erratic Info: The signal from the motor's tacho generator is unstable or not being correctly calibrated by the control board. | Washing Machine | |
| E18 | Appliance is completely dead or displays incorrect data Info: Major fault on the main control board (PCB), possibly related to the microprocessor or power supply unit. | Washing Machine |