CodesErreur Logo
CodesErreur.comPowered by CodesErreur
Database
Tools
Diagnostic ToolsNew Parts Locator
Community
CertificationsPRO Top Techs
B2B Services
Brands Manuals Specialists Job Board Elite Forum Academy
Premium
CodesErreur Logo

CodesErreur.com

Premium appliance diagnostics & repair database.
Powered by AI to help certified technicians worldwide.

Trusted by professionals in CH & FR

Platform

Error Code SearchAI Diagnostic ChatBrand Pokedex

Professionals

Elite Tech ForumElite Job BoardPremium Memberships

Corporate

Terms of UsePrivacy Policy

SAFETY DISCLAIMER

The technical information, diagnostic guides, error codes, and AI-generated suggestions provided on this website are intended exclusively for certified and qualified professionals. Appliance repair involves severe electrical hazards, high voltages, and mechanical risks that can result in fatal injury or severe property damage. If you are not a trained technician, do not attempt to repair any appliances. CodesErreur assumes no responsibility or liability for any damage, injury, or consequential losses resulting from the use of the information provided on this platform. You use all information entirely at your own risk.

© 2026 CodesErreur. All rights reserved.

Terms of Service Privacy Policy
Back to Search

Siltal Error Codes & Diagnostics

Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Siltal home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.

45 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
CodeFault / DiagnosticsAppliancesAction
E20
Machine stops mid-cycle with water in the drum
Info: General drainage fault. This is a common code on many brands Siltal manufactured for, indicating a blocked filter, pump, or hose.
Washing Machine
E20 Full Steps Diagnose
F01
Oven not heating or temperature inaccurate
Info: The oven temperature sensor (NTC) has an open circuit, meaning it's failed or the wiring is broken.
Oven
F01 Full Steps Diagnose
F1
Fridge section not cooling correctly, alarm may sound
Info: The temperature sensor (NTC) for the refrigerator compartment is faulty (open or short circuit).
Refrigerator
F1 Full Steps Diagnose
F02
Oven overheats or displays incorrect high temperature
Info: The oven temperature sensor (NTC) has a short circuit.
Oven
F02 Full Steps Diagnose
F2
Freezer section temperature is incorrect, alarm may sound
Info: The temperature sensor (NTC) for the freezer compartment is faulty.
Refrigerator
F2 Full Steps Diagnose
F03
Oven shuts down during use, possibly displaying 'STOP'
Info: Overheating has been detected by the safety thermostat, or the main board has detected a temperature runaway condition.
Oven
F03 Full Steps Diagnose
F3
Excessive frost buildup in the freezer, poor cooling
Info: Failure in the automatic defrost system. This could be a faulty defrost heater, thermal fuse, or defrost sensor.
Refrigerator
F3 Full Steps Diagnose
F04
Oven display is blank or unresponsive, controls don't work
Info: Communication error between the main power board and the user interface/display board.
Oven
F04 Full Steps Diagnose
F4
Fridge is not cold but freezer is working, unusual noise
Info: The evaporator fan motor has failed. This fan circulates cold air from the freezer to the fridge.
5 Elite Techs Verified
Refrigerator
F4 Full Steps Diagnose
F05
Oven door will not lock or unlock, pyrolysis cycle won't start
Info: The motorized door lock mechanism has failed, is jammed, or the microswitches are not registering correctly.
Oven
F05 Full Steps Diagnose
F5
Appliance not cooling efficiently, compressor runs constantly
Info: The condenser fan motor (located near the compressor) has failed. This fan cools the condenser coils and compressor.
Refrigerator
F5 Full Steps Diagnose
F07
Oven is completely dead or displays error on power up
Info: A critical failure has been detected on the main power board (PCB).
Oven
F07 Full Steps Diagnose
F08
Oven overheats and may shut down
Info: The main cooling fan, which cools the electronics, has failed or is jammed.
Oven
F08 Full Steps Diagnose
F8
Icemaker not producing ice
Info: A fault has been detected with the automatic icemaker mechanism or its sensor.
Refrigerator
F8 Full Steps Diagnose
i20
Washing machine or dishwasher stops and will not drain
Info: Drainage problem. Used by brands Siltal produced for (e.g., AEG/Electrolux platform). Indicates blocked filter/hose or faulty pump.
Washing Machine
i20 Full Steps Diagnose
← Previous PagePage 2 of 2 (45 results)
Next Page →