Arthur Martin i57

Arthur Martin error code I57 indicates: Arthur Martin ASF Series / Calypso / Electrolux Luxe Dishwasher: Circulation pump inverter phase current imbalance i57; unequal current distribution across stator coils..

The primary root cause for Arthur Martin code I57 is: On Arthur Martin (Arthur Martin ASF Series / Calypso / Electrolux Luxe Dishwasher) models: High-resistance connection on one motor phase pin, partial insulation breakdown between windings, or defective inverter driver channel..

To resolve error code I57: Disconnect motor plug and inspect pins for discoloration. Measure DC resistance of all 3 phase pairs with high-precision multimeter. Hold Départ/Pause and Option buttons firmly for 5 seconds until the red indicator extinguishes and service memory resets.

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Arthur Martin code I57 persists, the physical component causing On Arthur Martin (Arthur Martin ASF Series / Calypso / Electrolux Luxe Dishwasher) models: High-resistance connection on one motor phase pin, partial insulation breakdown between windings, or defective inverter driver channel. must be inspected or replaced.

Set a digital multimeter to ohms (Ω). Disconnect power and test 3-Phase Motor Windings / Tacho Generator / Carbon Brushes across Across phase pins U-V, V-W, U-W on motor harness; across tacho pins. Expected nominal reading is 3Ω–6Ω (BLDC phase U-V-W) / 60Ω–180Ω (Tacho coil) / 1.5Ω–3.5Ω (Universal stator). Tolerance: BLDC phase winding values must be strictly balanced within ±0.3Ω. Hand rotation generates 1V–4V AC on tacho..

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.